| 有关回转刀具的加工基准问题 |
| |
| 引用本文： | 唐胜江,唐余勇.有关回转刀具的加工基准问题[J].佳木斯大学学报,2002,20(1):43-45. |
| |
| 作者姓名： | 唐胜江 唐余勇 |
| |
| 作者单位： | [1]佳木斯第二发电厂，黑龙江佳木斯154002 [2]哈尔滨工业大学数学系，黑龙江哈尔滨150001 |
| |
| 基金项目： | 黑龙江省自然科学基金资助项目 |
| |
| 摘 要： | 在数控加工特种回转铣刀时，数控加工中的运动是连续，因此在同一设备加工不同刀具时必须有统一的基准，本文以圆柱球头铣刀和圆柱带角圆铣刀为例，给出了在以沟槽起始点为加工基准的刃口曲线方程，以及轴向，径向进给珲位公式，为二轴联动工这两类刀具提供了参考。
|
| 关 键 词： | 特种回转铣刀 数控加工 几何模型 加工基准 |
| 文章编号： | 1008-1402(2002)01-0043-03 |
| 修稿时间： | 2002年1月26日 |
THE BASE IN MACHINING REVOLVING TOOLS |
| |
| TANG Sheng-jiang ,TANG Yu-yong.THE BASE IN MACHINING REVOLVING TOOLS[J].Journal of Jiamusi University(Natural Science Edition),2002,20(1):43-45. |
| |
| Authors: | TANG Sheng-jiang TANG Yu-yong |
| |
| Institution: | TANG Sheng-jiang 1,TANG Yu-yong 2 |
| |
| Abstract: | Because the motion in machining special reVolVing tools with numerically controlled machine is continuous, it is necessary to determine a unitiVe base in machining different tools with the same machine. The curVilinear equation of cutting edge, of which the base is the start point of the splines, is giVen with the examples of machining buttonhead cutters and toroidal cutters. The location equations in axial and radial direction are carried out as well. It can be taken as a reference in machining these two kinds of cutters. |
| |
| Keywords: | special reVolVing tool NC geometrical model |
| 本文献已被 CNKI 维普 等数据库收录！ |
