Lectin-modified piezoelectric biosensors for bacteria recognition and quantification

The use of lectins for microorganism biosensors fabrication is proposed. Lectins are immobilised onto a gold-plated quartz crystal for direct piezoelectric label-free transduction of the bacteria–lectin binding event using an electrochemical quartz crystal microbalance (EQCM). Concanavalin A (Con A) and Escherichia coli were used for the evaluation of the lectin immobilisation method and the biosensor performance. Adsorption on nonpolarised and polarised (−0.200 V) gold-coated quartz crystals and immobilisation through avidin–biotin binding were checked for Con A surface attachment. Lectin–bacteria binding was evaluated in all cases. With a crystal modified with Con A via avidin–biotin immobilisation we obtained a linear calibration plot between 5.0 × 10⁶ and 2.0 × 10⁷ cfu mL⁻¹ by measuring frequency changes with E. coli concentration 1 h after bacteria addition. A remarkable increase in sensitivity was achieved when the analytical solution contained free biotinylated Con A, as a consequence of multiple lectin adhesion to Escherichia coli cell wall, which produced an accumulation of Con A–E. coli conjugates in the form of multilayers at the electrode surface. A detection limit of approximately 1.0 × 10⁴ cfu mL⁻¹ was achieved. Moreover nonspecific adsorptions were minimised. Using Con A and lectin from Arachis hypogaea, different response profiles were achieved for Escherichia coli, Staphylococcus aureus and Mycobacterium phlei, thus demonstrating the feasibility of bacteria discrimination. An approach involving filtering of free and lectin-bound bacteria and introduction of a filter in the measuring cell allowed a significant frequency change to be obtained for an E. coli concentration of 1.0 × 10³ cfu mL⁻¹ in order to further increase the sensitivity and discriminate between viable and nonviable cells; an approach using electrochemical measurements of bacterial catalase activity was also checked.