首页 | 本学科首页   官方微博 | 高级检索  
     检索      

Ni-Mo合金电沉积层织构及形成机理
引用本文:黄令,许书楷,汤皎宁,杨防祖,周绍民.Ni-Mo合金电沉积层织构及形成机理[J].电化学,1997,3(2):174.
作者姓名:黄令  许书楷  汤皎宁  杨防祖  周绍民
作者单位:厦门大学化学系
摘    要:在组成为:0.22mol/L硫酸镍、0.06mol/L钼酸钠和0.3mol/L柠檬酸钠的溶液,于纯铜片上采用恒电流沉积,所得Ni-Mo合金沉积层经X射线衍射测定,结果表明在温度为25℃~50℃,电流密度为10mA·cm-2~30mA·cm-2范围,Ni-Mo合金沉积层表现为(111)择优取向.循环伏安和电位阶跃实验表明镍钼合金电结晶过程按照连续成核和三维生长方式进行.Ni-Mo合金电沉积过程的电化学交流阻抗谱表明Ni-Mo共沉积过程经历了吸附中间产物步骤,由于吸附态物种氢氧化镍和钼的氧化物将阻化晶粒(111)晶面的生长,从而使镍钼沉积层表现为(111)择优取向.

关 键 词:Ni-Mo合金电沉积  织构  电结晶机理  
收稿时间:1997-05-28

Mechanism and Texture of Ni Mo Alloy Electrodeposition
Huang Ling,Xu Shukai Tang Jaoning Yang Fangzu Zhou Shaomin.Mechanism and Texture of Ni Mo Alloy Electrodeposition[J].Electrochemistry,1997,3(2):174.
Authors:Huang Ling  Xu Shukai Tang Jaoning Yang Fangzu Zhou Shaomin
Institution:Huang Ling * Xu Shukai Tang Jaoning Yang Fangzu Zhou Shaomin
Abstract:Ni Mo alloy deposits with (111) preferred orientation was obtained in a solution of 0.22 mol/L NiSO 4·6H 2O, 0.06 mol/L Na 2MoO 4·2H 2O and 0.3 mol/L Na 3C 6H 5O 7·2H 2O in temperature from 25℃ to 50℃,and current densities ranged from 10 mA·cm -2 to 30 mA·cm -2 . The electrodeposition of Ni Mo alloy was studied by cylic voltammetry and potential step experiment. It was shown that Ni Mo alloy is formed by mechanism involving progressive nucleation followed by three dimensional growth of the metal centres. The complex plane impedance plots indicate codeposition of Ni Mo alloy involves the intermediate adion. The growth of (111) plane of crystallite is inhibited with adsorption of (NiOH) ads and MoO 2, So Ni Mo alloy deposit exhibits (111) preferred orientation.
Keywords:Ni  Mo alloy electrodeposition  Texture  Electrocrystallization mechanism  
本文献已被 CNKI 等数据库收录!
点击此处可从《电化学》浏览原始摘要信息
点击此处可从《电化学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号