The stress concentration near a rigid line inclusion in a prestressed, elastic material. Part I.: Full-field solution and asymptotics

A lamellar (zero-thickness) rigid inclusion, so-called ‘stiffener’, is considered embedded in a uniformly prestressed (or prestrained), incompressible and orthotropic elastic sheet, subject to a homogeneous far-field deformation increment. This problem is solved under the assumption of plane strain deformation, with prestress principal directions and orthotropy axes aligned with the stiffener. A full-field solution is obtained solving the Riemann-Hilbert problem for symmetric incremental loading at infinity (while for shear deformation the stiffener leaves the ambient field unperturbed). In addition to the full-field solution, the asymptotic Mode I near-tip representation involving the corresponding incremental stress intensity factor are derived and these results are complemented with the Mode II asymptotic solution. For null prestress, the full-field stress state is shown to match correctly with photoelastic experiments performed by us (on two-part epoxy resin samples containing an aluminum lamina). Our experiments also confirm the fracture patterns for a brittle material containing a stiffener, which do not obey a hoop-stress criterion and result completely different from those found for cracks. Issues related to shear band formation and evaluation of energy release rate for a stiffener growth (or reduction) are deferred to Part II of this article.