| 深冷处理工艺对高速钢刀具切削性能的影响 |
| |
| 引用本文： | 马光锋,李万友,李智超,赵德生. 深冷处理工艺对高速钢刀具切削性能的影响[J]. 辽宁工程技术大学学报(自然科学版), 1989, 0(1) |
| |
| 作者姓名： | 马光锋 李万友 李智超 赵德生 |
| |
| 作者单位： | 阜新矿业学院机制教研室(马光锋)，阜新矿业学院热处理教研室(李万友)，阜新矿业学院热加工教研室(李智超)，阜新矿业学院热处理车间(赵德生) |
| |
| 摘 要： | 对W_(18)Gr_4V钢制刀具进行不同方式的淬火、回火及深冷处理,凡经深冷处理的刀具,切削寿命均得到提高.其中淬火、三次回火后再进行深冷处理的工艺,切削寿命提高最显著.
|
| 关 键 词： | 深冷处理 刀具寿命 淬火 回火 |
THE INFLUENCE OF THE DEEP COLD TREA-TMENT TECHNOLOGY ON CUTTING PER-FORMANCE OF HIGHSPEED STEAL CUTTERS |
| |
| Ma Guangfeng Li Wanyou Li Zhichao zhao Desheng. THE INFLUENCE OF THE DEEP COLD TREA-TMENT TECHNOLOGY ON CUTTING PER-FORMANCE OF HIGHSPEED STEAL CUTTERS[J]. Journal of Liaoning Technical University (Natural Science Edition), 1989, 0(1) |
| |
| Authors: | Ma Guangfeng Li Wanyou Li Zhichao zhao Desheng |
| |
| Affiliation: | Ma Guangfeng Li Wanyou Li Zhichao zhao Desheng |
| |
| Abstract: | In this paper, it is showed that the cutting life of the cutters made of W18cr4v will increase after they are treated with the technology of quenching, tempering and deep cold treating with different methods Specially, the cutting life of the cutters increases obviously which are treated with a deep cold technology after quenching and three times tempering. |
| |
| Keywords: | deep cold treatment tool life quenching tempering |
| 本文献已被 CNKI 等数据库收录！ |
