首页 | 本学科首页   官方微博 | 高级检索  
     

多脉冲飞秒激光对锗材料的烧蚀效应
引用本文:辛建婷,谭放,罗国强,马小军,赵宗清,韩丹. 多脉冲飞秒激光对锗材料的烧蚀效应[J]. 强激光与粒子束, 2011, 23(7). DOI: 10.3788/HPLPB20112307.1753
作者姓名:辛建婷  谭放  罗国强  马小军  赵宗清  韩丹
作者单位:1. 中国工程物理研究院 激光聚变研究中心, 四川 绵阳 621900; 2. 武汉理工大学 材料复合新技术国家重点实验室, 武汉 430070
摘    要: 开展了脉宽为40 fs的不同数量激光脉冲对锗材料的烧蚀效应实验,采用扫描电镜、激光共聚焦显微镜等方法对不同数量的飞秒激光脉冲作用下锗材料表面烧蚀区进行了检测,并对作用后材料烧蚀形貌演化规律进行了分析,初步分析了锗材料烧蚀区周围形成的不同环区的形貌特征及成因,对各环区烧蚀形貌特征随激光作用脉冲数的增加而产生的形貌演化过程进行了观测。并给出单脉冲飞秒激光对锗材料的烧蚀阈值为1.2 J·cm-2,采用激光共聚焦显微镜测得该阈值条件下单个飞秒激光脉冲对锗材料的烧蚀深度约为150 nm。

关 键 词:飞秒激光    烧蚀阈值  烧蚀形貌  扫描电镜
收稿时间:1900-01-01;

Ablation morphology of germanium with multi-pulse femtosecond laser
Xin Jianting,Tan Fang,Luo Guoqiang,Ma Xiaojun,Zhao Zongqing,Han Dan. Ablation morphology of germanium with multi-pulse femtosecond laser[J]. High Power Laser and Particle Beams, 2011, 23(7). DOI: 10.3788/HPLPB20112307.1753
Authors:Xin Jianting  Tan Fang  Luo Guoqiang  Ma Xiaojun  Zhao Zongqing  Han Dan
Affiliation:(1. Research Center of Laser Fusion, CAEP, P.O.Box 919-986, Mianyang 621900, China; 2. State Key Laboratory of Advanced Technology for Materials Synthesis and Processing,Wuhan University of Technology, Wuhan 430070, China)
Abstract:Ablation morphology on germanium surface using multi-pulse femtosecond laser is reported. The SEM and laser focus give magnified views of the ablated portion. The ablation morphology shows a periodic surface structure with various laser pulses. And the formation of amorphous rings and ripples in the damage spot is discussed. The ablation threshold is 1.2 J·cm-2 and the ablation depth with single femtosecond laser pulse is about 150 nm. It is meanful for research the interaction of femtosecond laser and material, and the application of femtosecond laser in micromachining.
Keywords:germanium  ablation threshold  ablation morphology  scanning electron microscope
本文献已被 万方数据 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号