首页 | 本学科首页   官方微博 | 高级检索  
     检索      

利用混合载气提高COIL化学效率
引用本文:徐明秀,桑凤亭,陈方,房本杰,金玉奇.利用混合载气提高COIL化学效率[J].强激光与粒子束,2011,23(7).
作者姓名:徐明秀  桑凤亭  陈方  房本杰  金玉奇
作者单位:中国科学院 大连化学物理研究所, 中国科学院 化学激光重点实验室, 辽宁 大连116023
摘    要: 为进一步提高氧碘化学激光器效率,提出一种不改变激光器结构,仅变换主副载气的方法。在增益区长度为11.7 cm的激光器上进行实验,以N2, Ar和CO2做为氧碘化学激光器的主载气或副载气,对激光器的输出功率和化学效率进行了研究。实验结果表明,平均分子质量改变对主副气流的混合是有利的,因而可以提高激光器的输出效率。当N2为主载气,Ar为副载气时,激光器输出功率和化学效率最高,分别达到3.09 kW,30.2%。

关 键 词:化学氧碘激光  化学效率  载气  氮气  氩气  二氧化碳
收稿时间:1900-01-01;

Increasing chemical efficiency by mixing different buffer gases on COIL
XuMingxiu,Sang Fengting,ChenFang,FangBenjie,JinYuqi.Increasing chemical efficiency by mixing different buffer gases on COIL[J].High Power Laser and Particle Beams,2011,23(7).
Authors:XuMingxiu  Sang Fengting  ChenFang  FangBenjie  JinYuqi
Institution:(Key Laboratory of Chemical Laser of Chinese Academy of Sciences, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023, China)
Abstract:To improve the output power and chemical efficiency,a new method is put forward,which requires no notable change in the configurations and uses different gases as buffer gas.Some experiments are done on chemical oxygen-iodine laser (COIL) with an 11.7 cm gain length.When N2,Ar and CO2 are used as the primary and secondary buffer gases,change of the average molecular weight promotes the mixing between the primary and secondary gases.Experimental results confirm the possibility of improving the chemical efficiency.When N2 is used as the primary gas and Ar as the secondary gas,the highest output power and chemical efficiency are obtained as 3.09 kW and 30.2%.
Keywords:chemical oxygen-iodine laser (COIL)  chemical efficiency  buffer gas  N2  Ar  CO2
本文献已被 万方数据 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号