Crystal and phase morphology of dynamic-packing-injection-molded high-density polyethylene/ethylene vinyl acetate blends

The effect of shear stress, provided by so-called dynamic-packing injection molding, on crystal morphology and phase behavior was investigated for high-density polyethylene (HDPE) in blends with ethylene vinyl acetate (EVA) of various viscosities and vinyl acetate (VA) contents, with the aid of differential scanning calorimetry, two-dimensional small-angle X-ray scattering (2D SAXS), and scanning electron microscopy (SEM). A shish-kebab pattern was found in the oriented zones of dynamic samples, and the ratio of shish to kebab increased as a function of the EVA content in the blends up to 20 wt %, regardless of the VA content. This showed that molecules of HDPE could easily be stretched to form a shish structure in the presence of EVA. Moreover, a large increase in the long spacing, characterized by 2D SAXS measurements, was achieved because of the presence of EVA. The SEM results showed an obvious decrease in the domain size of the EVA phase under the effect of shear stress. All these results suggested shear-induced mixing between HDPE and EVA, in that ethylene segments of EVA molecules could be forged in the shish structure during shear and the other fractions of EVA were located in the amorphous regions between the adjacent lamellae of HDPE. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1831–1840, 2004