Stress and Moisture Effects on Thin Film Buckling Delamination |
| |
Authors: | P. Waters A. A. Volinsky |
| |
Affiliation: | (1) Department of Mechanical Engineering, University of South Florida, 4202 E Fowler Ave ENB118, Tampa, FL 33620, USA |
| |
Abstract: | Deposition processes control the properties of thin films; they can also introduce high residual stresses, which can be relieved by delamination and fracture. Tungsten films with high 1–2 GPa compressive residual stresses were sputter deposited on top of thin (below 100 nm) copper and diamond-like carbon (DLC) films. Highly stressed films store large amounts of strain energy. When the strain energy release rate exceeds the films' interfacial toughness, delamination occurs. Compressive residual stresses cause film buckling and debonding, forming open channels. Profiles of the buckling delaminations were used to calculate the films' interfacial toughness and then were compared to the adhesion results obtained from the superlayer indentation test. Tests were conducted in both dry and wet environments and a significant drop in film adhesion, up to 100 times was noticed due to the presence of moisture at the film/substrate interface. |
| |
Keywords: | Thin films Adhesion Stress Environmentally assisted fracture Buckling delamination Telephone cord |
本文献已被 SpringerLink 等数据库收录! |
|