Comparison of Pb, Cd Adsorption to Surface Coatings Developed in Natural Waters with that in Plant Effluents

The comparative studies of Pb and Cd adsorption to the surface coatings(Fe, Mn, Al oxides, organic materials, and associated minerals), which were developed on glass slides in five natural and two technical waters(plant effluents), were carried out under controlled laboratory conditions(mineral salts solution with defined speciation, ionic strength 0.05 mol/L, 25 ℃ and pH 6.0). The classical Langmuir adsorption isotherm was applied to estimating the equilibrium coefficients of Pb and Cd adsorption to the surface coatings. The results show that the maximum adsorption of Pb and Cd to the surface coatings mentioned above varied widely. There was a systemic increase in the maximum adsorption of Pb and Cd to the surface coatings with increasing the contents of Mn and Fe oxides in the surface coatings in significant correlation, respectively, not only highlighting the relative importance of the metal oxide fraction for Pb and Cd adsorption to the surface coatings developed in natural and technical water samples, but also implying the same adsorption mechanisms of Pb and Cd to the surface coatings developed both in natural and technical water samples.