Diffusion control in radiation graft polymerization with varying dependence of rate on monomer concentration

The quantitative effect of diffusion control on the rate of radiation-initiated graft polymerization has been studied theoretically for systems in which the diffusion-free reaction may show various dependencies of rate on monomer concentration other than the usual first-order dependence. The study is also very general in that it can be applied to systems involving a variety of different modes of initiation and termination. Whether the grafting process is diffusion-free or diffusion-controlled has been analyzed in terms of the interaction of the initiation rate R_i, the propagation and termination rate constants k_p and k_t, the equilibrium solubility M of the monomer in the polymer, the polymer film thickness L, the diffusivity D of the monomer in the polymer, and the diffusion-free kinetic order of dependence v of the grafting rate on monomer concentration. The dependence of the grafting rate for both the diffusion-free and diffusion-controlled reactions on these parameters is expressed both by mathematical experssions and graphically. Diffusion control is shown to occur at a critical value of the parameter A which is proportional to L(k_pR_i^w/k_t^zD)^1/2M^(ε?1)/2 where w, z, and v have different values depending on the specific modes of initiation, propagation and termination in a particular grafting system. The grafting rate is shown to vary with the value of A according to specific mathematical expressions. In comparing diffusion-free to diffusion-controlled reaction, it is shown that the former is independent of L and D while the latter is directly dependent on L and inversely on D^1/2. Further, the change from diffusion-free to diffusion-controlled reaction involves a change in the dependence of rate on monomer from v-order to (v ? 1)/2]-order. The nonsteady-state as well as the steady-state reaction rates have been analyzed.