首页 | 本学科首页   官方微博 | 高级检索  
     

铝合金外壳阳极氧化层缺陷分析
引用本文:温静娴,韦早春,于梅花. 铝合金外壳阳极氧化层缺陷分析[J]. 广西大学学报(自然科学版), 2010, 35(3)
作者姓名:温静娴  韦早春  于梅花
作者单位:1. 广西大学,材料科学与工程学院,广西,南宁,530004
2. 广西民族大学,物理与电子工程学院,广西,南宁,530006
基金项目:广西自然科学基金资助项目 
摘    要:利用扫描电镜及能谱仪对相机外壳阳极氧化膜缺陷进行分析,发现该铝合金外壳在进行阳极化处理前就存在凹陷缺陷,该凹陷缺陷是在轧制过程中产生的"条痕"缺陷,以及在"条痕"之间存在的夹渣,它们改变了缺陷处的阳极化条件,造成缺陷处阳极氧化反应时形成一定方向的银色和黑色相间的流线型条纹。

关 键 词:阳极氧化  铝合金  氧化膜  夹渣

Analysis on the defects on the aluminum oxide films of aluminum-alloy shells
WEN Jing-xian,WEI Zao-chun,YU Mei-hua. Analysis on the defects on the aluminum oxide films of aluminum-alloy shells[J]. Journal of Guangxi University(Natural Science Edition), 2010, 35(3)
Authors:WEN Jing-xian  WEI Zao-chun  YU Mei-hua
Affiliation:WEN Jing-xian1,WEI Zao-cun2,YU Mei-hua1 (1.College of Material Science and Engineering,Guangxi University,Nanning 530004,China,2.College of physics and Electronic Tecnology,Guangxi University of National,Nanning 530006,China)
Abstract:Defects on the aluminum oxide films of camera shell made of aluminum alloys were analyzed by SEM and EDAX.It was found that sunken microdefects including scratches on the camera shell had existed before the alumite process and were formed during the rolling process.There were slag inclusions existing between the scratches.The presented defects changed the anodic treatment conditions of the surrounding area of the defects and caused the formation of the black and silver streamlines in the defect area during ...
Keywords:Anodic oxidation  aluminum-alloy  oxide film  slag inclusion  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号