High‐pressure rheology of polystyrene melts plasticized with CO2: Experimental measurement and predictive scaling relationships

A high‐pressure extrusion slit die rheometer was constructed to measure the viscosity of polymer melts plasticized by liquid and supercritical CO₂. A novel gas injection system was devised to accurately meter the follow of CO₂ into the extruder barrel. Measurements of pressure drop, within the die, confirm the presence of a one‐phase mixture and a fully developed flow during viscosity measurements. Experimental measurements of viscosity as a function of shear rate, pressure, temperature, and CO₂ concentration were conducted for three commercial polystyrene melts. The CO₂ was shown to be an effective plasticizer for polystyrene, lowering the viscosity of the polymer melt by as much as 80%, depending of the process conditions and CO₂ concentration. Existing theories for viscoelastic scaling of polymer melts and the prediction of T_g depression by a diluent were used to develop a free volume model for predicting the effects of CO₂ concentration and pressure on polymer melt rheology. The free volume model, dependent only on material parameters of the polymer melt and pure CO₂, was shown to accurately collapse the experimental data onto a single master curve independent of pressure and CO₂ concentration for each of the three polystyrene samples. This model constitutes a simple predictive set of equations to quantify the effects of gas‐induced plasticization on molten polymer systems. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 3168–3180, 2000