Remote characterization of defects in plates with viscoelastic coatings using guided waves |
| |
Authors: | Galán José M Abascal Ramón |
| |
Institution: | Escuela Superior de Ingenieros, Universidad de Sevilla, Camino de los Descubrimientos s/n, E-41092 Sevilla, Spain. jmgalan@esi.us.es |
| |
Abstract: | The remote inspection for defects in large metallic elements such as pipes, tubes and plates is a field where guided waves are being applied with success. There are a number of situations where a surface coating is added for corrosion protection or insulation purposes. Since the coating materials are usually viscoelastic, the guided wave inspection range may be severely reduced unless a proper mode and an adequate frequency range is selected. Previous authors found the existence of low-attenuated modes at certain frequency ranges, which were used to detect and locate defects at reasonably large distances. This paper studies the potential of guided waves for not only locating but also sizing defects in plates with viscoelastic coatings. A hybrid finite element-boundary element method which explicitly includes the attenuating characteristics of the coating is used to determine Lamb and SH mode conversion factors at corrosion defects under the coating. Through parametric studies and analysis of the numerical results, some trends and features are highlighted that could be used for sizing purposes. |
| |
Keywords: | |
本文献已被 PubMed 等数据库收录! |
|