| 碳钢渗硫层面接触滑动摩擦特性的试验研究 |
| |
| 引用本文： | 高伟 施忠良. 碳钢渗硫层面接触滑动摩擦特性的试验研究[J]. 摩擦学学报, 1998, 18(4): 312-315 |
| |
| 作者姓名： | 高伟 施忠良 |
| |
| 作者单位： | [1]山东工业大学材料学院金工教研室 [2]上海交通大学复合材料国家重点实验室 |
| |
| 基金项目： | 山东省自然科学基金，上海交通大学复合材料国家重点实验室基金 |
| |
| 摘 要： | 采用低温离子渗硫方法制备了不同厚度的４５＾＃钢渗硫层材料，利用面接触摩擦试验装置测定了在不同的载荷，加工方法，表面粗糙度及表面硬度下渗硫层的摩擦系数，并对其进行了分析。结果表明：在满足减摩条件下可适当减小渗硫层厚度。研究结果为后续理论研究及渗硫技术的应用提供了试验依据。
|
| 关 键 词： | 渗硫 滑动摩擦 碳钢 面接触 |
Study on the Friction Behavior of Sulphurized Carbon Steel |
| |
| Gao Wei. Study on the Friction Behavior of Sulphurized Carbon Steel[J]. Tribology, 1998, 18(4): 312-315 |
| |
| Authors: | Gao Wei |
| |
| Affiliation: | Gao Wei (Shandong University of Technology Jinan 250061 China) Shi Zhongliang Gu Mingyuan (Shanghai Jiaotong University Shanghai 200030 China) |
| |
| Abstract: | The sulphurized carbon steel has good anti friction behavior and is widely used in industry. The anti friction behavior of sulphurized carbon steel by means of low temperature ion sulphurizing has been studied with pin on ring tester. The effect of variables such as load, thickness of sulphurized layer, surface roughness, and surface hardness on the friction coefficient has been analyzed.The results showed that the thickness of sulphurized layer could be somewhat thin at without sacrifice of the friction reduction performance. |
| |
| Keywords: | sulphurizing sliding friction carbon steel |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《摩擦学学报》浏览原始摘要信息 |
|
点击此处可从《摩擦学学报》下载全文 |
