首页 | 本学科首页   官方微博 | 高级检索  
     检索      

复合型阻抗加载微波吸收材料的研究
引用本文:蔡永建,杨阳,李尚生,赵志林,陈如山.复合型阻抗加载微波吸收材料的研究[J].南京理工大学学报(自然科学版),2005,29(5):518-520.
作者姓名:蔡永建  杨阳  李尚生  赵志林  陈如山
作者单位:南京理工大学,电子工程与光电技术学院,江苏,南京,210094;烟台海军航空工程学院,电子工程系,山东,烟台,264001
基金项目:国家自然科学基金(60271005)
摘    要:研究了遗传算法在复合型阻抗加载微波吸收材料设计中的应用,分别对多层铁氧体吸波材料和复合型阻抗加载吸波材料的厚度和结构进行了优化计算.理论分析结果表明,随着阻抗加载电路在多层铁氧体吸波材料中的加入,3 mm厚和5 mm厚的吸波材料的吸收性能分别提高了20 %和10 %,而且在频段上也更加符合宽须吸收的要求.

关 键 词:阻抗加载  微波吸收材料  遗传算法
文章编号:1005-9830(2005)05-0518-03
收稿时间:2004-06-02
修稿时间:2005-06-28

Composite Impedance Loaded Microwave Absorbing Materials
CAI Yong-jian,YANG Yang,LI Shang-sheng,ZHAO Zhi-lin,CHEN Ru-shan.Composite Impedance Loaded Microwave Absorbing Materials[J].Journal of Nanjing University of Science and Technology(Nature Science),2005,29(5):518-520.
Authors:CAI Yong-jian  YANG Yang  LI Shang-sheng  ZHAO Zhi-lin  CHEN Ru-shan
Institution:1. Department of Electronic Engineering and Optoeletronie Technology, NUST, Nanjing 210094, China; 2. Department of Electronic Engineering, Yantai Institute of Navy Aviation Engineering, Yantai 264001, China
Abstract:This paper presents the optimum design for the composite impedance loaded microwave absorbing materials using the genetic algorithm(GA).The thickness and the structure of the multi-layer ferrite absorbing materials and the composite impedance loaded absorbing materials are optimized.The results show that the absorbing performances of the 3-mm-thick and 5-mmthick microwave absorbing materials increase by 20 % and 10 % respectively with the use of the composite impedance loaded materials.A wider microwave absorbing frequency band is obtained.
Keywords:impedance loaded  microwave absorbers  genetic algorithm
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号