首页 | 本学科首页   官方微博 | 高级检索  
     检索      

常用制冷工质稠密流体的黏度推算方法
引用本文:薛榕,何茂刚,张颖,杨亚晶.常用制冷工质稠密流体的黏度推算方法[J].工程热物理学报,2008,29(12).
作者姓名:薛榕  何茂刚  张颖  杨亚晶
作者单位:西安交通大学动力工程多相流国家重点实验室,陕西,西安,710049
基金项目:国家自然科学基金项目资助,教育部"新世纪优秀人才支持计划"
摘    要:本文通过关联无量纲化剩余黏度与对比密度的关系,提出了一种推算常用制冷工质稠密流体黏度的维里型黏度状态方程.应用该方程只需已知该工质的临界参数、分子量和偏心因子即可完成计算,使得迁移性质的计算在热力学面上和平衡性质的计算保持了完整的一致性.本文通过上述方法计算了9种常用制冷工质的液相黏度,与实验数据比较显示,总平均偏差为2.36%,最大偏差为27.6%.

关 键 词:维里型黏度状态方程  黏度推箅  制冷工质

VISCOSITY PREDICTION OF VISCOUS FLUID OF COMMON REFRIGERANT
XUE Rong,HE Mao-Gang,ZHANG Ying,YANG Ya-Jing.VISCOSITY PREDICTION OF VISCOUS FLUID OF COMMON REFRIGERANT[J].Journal of Engineering Thermophysics,2008,29(12).
Authors:XUE Rong  HE Mao-Gang  ZHANG Ying  YANG Ya-Jing
Institution:XUE Rong HE Mao-Gang ZHANG Ying YANG Ya-Jing (State Key Laboratory of Multiphase Flow in Power Engineering,Xi\'an Jiaotong University,Xi\'an 710049,China)
Abstract:In this study,a Virial-type viscosity Equation of State(EOS)used for predicting the vis- cosity of the viscous fluid of common refrigerant was established via relating the dimensionless residual viscosity with the reduced density.Adopting this equation,only the critical parameters,molecular weight and eccentric factor of the refrigerant are needed to conduct the calculation.Therefore,on the thermodynamic surface,there is an integrated concordance between the calculation of transport property and that of equ...
Keywords:virial-type viscosity equation of state  viscosity prediction  refrigerant  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号