Provisioning Methods for Bit-Rate-Differentiated Services in Hybrid Optical Networks

This paper addresses the problem of routing and wavelength assignment of bit-rate-differentiated optical services in a hybrid network. Hybrid optical networks are composed of resources, such as fiber links and photonic/electronic switches, that vary in their capabilities and transmission qualities. These networks are also responsible for the realization of optical services with varying quality-of-service (QoS) guarantees. In such networks, it is required to have a cost-effective assignment of the optical and electronic resources to these services in order to maximize the revenue of the network operator. This paper deals with optical services that are defined according to their tolerance to transmission impairments. We first divide the provisioning problem into two phases: (1) routing and (2) wavelength assignment and regeneration reservation. In the routing phase, a set of k-routes are generated to select from in the second phase, where each route optimizes a specific aspect of the problem (e.g., number of hops, maximum accumulated noise, etc.). The second phase, using the information about the resources along each route, attempts at finding the best wavelength allocation on that route such that the signal quality meets the service-level agreement (SLA). The second phase also uses the minimum number of regenerator ports on intermediate nodes for the purpose of wavelength translation and signal clean-up. Comparisons of the above scheme with a probing-based method, reveal substantial enhancements to the blocking performance with a maximum running time increase of 60%. In addition, the use of multiple routes provides higher reduction in the blocking probability over single-routing schemes. Moreover, the proposed, non-pessimistic, provisioning approach has a major impact on reducing the regeneration budget of the network.