首页 | 本学科首页   官方微博 | 高级检索  
     检索      

多阳极位置灵敏光电倍增管位置读出电路的设计实现
引用本文:赵翠兰,漆玉金,施亮,金庆,代秋声.多阳极位置灵敏光电倍增管位置读出电路的设计实现[J].原子核物理评论,2010,27(1):63-67.
作者姓名:赵翠兰  漆玉金  施亮  金庆  代秋声
作者单位:1 上海交通大学自动化系, 上海200030;2 中国科学院上海应用物理研究所, 上海201800
基金项目:中国科学院百人计划资助项目(26050601)~~
摘    要:多阳极位置灵敏光电倍增管(PSPMT)被广泛地用来开发高分辨的小型γ相机模块。探讨了PSPMT的位置读出电路的简化设计研究, 并针对日本滨松的H8500型多阳极PSPMT, 设计和开发了离散位置读出电路(DPC)和均衡电荷分配电路(SCDC)两种简化的位置读出电路, 并在SCDC中加入了局域重心(TCOG)的定位方法, 进一步地优化读出电路的简化设计。初步的实验测试结果表明, SCDC结合TCOG定位法, 能显著地改善探测器的定位非线性及压缩效应, 扩展有效的成像视野(FOV), 比DPC方法的有效视野增大了约20%。The multi anode position sensitive photomultiplier tube(PSPMT) has been used for the development of high resolution γ camera module. This study is aimed to investigate the simplified readout design for the multi anode flat panel PSPMT. Based on the Hamamatsu H8500 PSPMT with 64 multi anodes, we designed and developed two simplified readout circuits, discretized positioning circuit(DPC) and symmetric charge division circuit(SCDC). The truncated center of gravity(TCOG) positioning method was used to optimize the readout signal processing and then further reduce the readout channels by a resistor chain. The preliminary results show that the SCDC readout with the TCOG could significantly reduce the non linearity of positioning and improve the effective field of view of the detector by about 20% as compared to the DPC readout.

关 键 词:位置灵敏光电倍增管    离散位置读出电路    均衡电荷分配电路    局域重心法
收稿时间:1900-01-01

Design and Implementation of Simplified Readout Circuits for Multi-anode Position-sensitive Photomultiplier Tubes
ZHAO Cui-lan,QI Yu-jin,SHI Liang,JIN Qing,DAI Qiu-sheng.Design and Implementation of Simplified Readout Circuits for Multi-anode Position-sensitive Photomultiplier Tubes[J].Nuclear Physics Review,2010,27(1):63-67.
Authors:ZHAO Cui-lan  QI Yu-jin  SHI Liang  JIN Qing  DAI Qiu-sheng
Institution:1 Department of Automation, Shanghai Jiaotong University, Shanghai 200030, China;2 Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800, China
Abstract:The multi-anode position sensitive photomultiplier tube(PSPMT)has been used for the development of high-resolution γ camera module.This study is aimed to investigate the simplified readout design for the multi-anode flat panel PSPMT.Based on the Hamamatsu H8500 PSPMT with 64 multi-anodes,we designed and developed two simplified readout circuits,discretized positioning circuit(DPC)and symmetric charge division circuit(SCDC).The truncated center-of-gravity(TCOG)positioning method was used to optimize the readout signal processing and then further reduce the readout channels by a resistor chain.The preliminary results show that the SCDC readout with the TCOG could significantly reduce the non-linearity of positioning and improve the effective field-of-view of the detector by about 20% as compared to the DPC readout.
Keywords:multi-anode position sensitive photomultipiler tube  discretized positioning circuit  symmetric charge division circuit  truncated-center-of-gravity positioning method  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《原子核物理评论》浏览原始摘要信息
点击此处可从《原子核物理评论》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号