首页 | 本学科首页   官方微博 | 高级检索  
     

透平叶片中的二次流旋涡结构的研究
引用本文:王仲奇,冯国泰,王松涛,陈乃兴. 透平叶片中的二次流旋涡结构的研究[J]. 工程热物理学报, 2002, 23(5): 553-556
作者姓名:王仲奇  冯国泰  王松涛  陈乃兴
作者单位:1. 哈尔工业大学能源科学与技术学院,黑龙江,哈尔滨,150001
2. 中国科学院工程热物理研究所,北京,100080
基金项目:国家重点研究规划项目(No.G1999022306),国家自然科学基金项目(No.59876041)
摘    要:当今在透平机械行业中的研究人员常常会被二次流旋涡结构的研究所吸引。本文作者主要用数值计算,部分地也用实验手段,试图研究、分析与讨论叶片通道中马蹄涡、通道涡、角隅涡和间隙涡等二次流旋涡的生成、演绎与发展。对于壁涡由于尺寸很小而不容易发现。现在应用弯扭叶片作为一种手段来降低叶片损失的人多了,从而需要对弯扭叶片对上述旋涡的影响进行研究。因此,本文对周向弯扭叶片的影响以及其对损失影响的机理也进行了讨论。

关 键 词:叶轮机械  二次流旋涡  弯扭叶片
文章编号:0253-231X(2002)05-0553-04
修稿时间:2001-11-21

STUTY ON SECONDARY FLOW VORTEX STRUCTURES IN TURBINE BLADINGS
WANG Zhong-Qi FENG Guo-Tai WANG Song-Tao CHEN Nai-Xing. STUTY ON SECONDARY FLOW VORTEX STRUCTURES IN TURBINE BLADINGS[J]. Journal of Engineering Thermophysics, 2002, 23(5): 553-556
Authors:WANG Zhong-Qi FENG Guo-Tai WANG Song-Tao CHEN Nai-Xing
Affiliation:WANG Zhong-Qi1 FENG Guo-Tai1 WANG Song-Tao1 CHEN Nai-Xing2
Abstract:Study on secondary flows in turbomachinery has attracted the attention of researchers in turbomachinery community. In the present paper, using numerical method mainly and experiment partially, the authors tried to analyze and discuss the generation and the evolution of secondary flow vortices in turbine blade passage. They are horseshoe vortex, passage vortex, corner vortex and tip clearance vortex. It is difficult to find wall vortex due to its small size. Since using blade bowing is one of the ways for reducing blade loss, here the blade bowing effects on these vortices are given, and the loss reduction mechanism is also discussed.
Keywords:turbomachinery  secondary flow vortices  blade bowing
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号