| 变形条件对AZ31镁合金冷压缩过程中孪生的影响 |
| |
| 引用本文： | 刘天模,袁晗琦,彭天成,刘建忠.变形条件对AZ31镁合金冷压缩过程中孪生的影响[J].重庆大学学报(自然科学版),2010,33(10):37-41. |
| |
| 作者姓名： | 刘天模 袁晗琦 彭天成 刘建忠 |
| |
| 作者单位： | 重庆大学材料科学与工程学院,重庆,400045;重庆大学国家镁合金材料工程技术研究中心,重庆,400045;重庆大学材料科学与工程学院,重庆,400045;重庆大学国家镁合金材料工程技术研究中心,重庆,400045;重庆大学材料科学与工程学院,重庆,400045;重庆大学国家镁合金材料工程技术研究中心,重庆,400045;重庆大学材料科学与工程学院,重庆,400045;重庆大学国家镁合金材料工程技术研究中心,重庆,400045 |
| |
| 基金项目： | 国家973计划项目（2007CB613700） |
| |
| 摘 要： | 在新三思拉伸试验机CMT-5150上对均匀态AZ31镁合金进行室温压缩试验,研究了在变形量分别为5%、7.5%、10%、12.5%、15%以及变形速率分别为0.5、1、2、4mm/min时压缩变形组织中孪晶的形态与分布。结果表明:在压缩变形初期,只有少量晶粒内出现孪晶,孪晶较宽;而在压缩变形末期,孪晶几乎分布于所有晶粒中,且出现了细而长的孪晶。孪晶分数随变形程度的增大而上升。随着变形速率的增大,孪晶形态变细,且其密度增大,试样的屈服强度和抗压强度都升高。
|
| 关 键 词： | AZ31 镁合金 变形量 变形速率 孪晶 |
| 收稿时间： | 2010/4/20 0:00:00 |
Effect of deformation conditions on twinning of AZ31 magnesium alloy during compression test |
| |
| LIU Tian-mo,YUAN Han-qi,PENG Tian-cheng and LIU Jian-zhong.Effect of deformation conditions on twinning of AZ31 magnesium alloy during compression test[J].Journal of Chongqing University(Natural Science Edition),2010,33(10):37-41. |
| |
| Authors: | LIU Tian-mo YUAN Han-qi PENG Tian-cheng and LIU Jian-zhong |
| |
| Institution: | College of Materials Science and Engineering,National Engineering Research Center for May nesium Alloys,Chongqing University,Chongqing 400045,P.R. China;College of Materials Science and Engineering,National Engineering Research Center for May nesium Alloys,Chongqing University,Chongqing 400045,P.R. China;College of Materials Science and Engineering,National Engineering Research Center for May nesium Alloys,Chongqing University,Chongqing 400045,P.R. China;College of Materials Science and Engineering,National Engineering Research Center for May nesium Alloys,Chongqing University,Chongqing 400045,P.R. China |
| |
| Abstract: | Deformation twinning of homogenizing magnesium alloy AZ31 is respectively investigated by compression at room temperature with different deformation degrees from 5% to 15% and different deformation rates from 0.5 to 4mm/min.The results show that thick twins exit in a few amount of crystals at the beginning of the deformation.The thin-long twins and the thick twins appear at the end of the deformation,and they can be observed in almost all crystals.With increasing compressing rates,the yield strength,compression resistance fracture strength and density of twins increased,and twins become thin. |
| |
| Keywords: | AZ31 deformation degrees deformation rates twinning |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《重庆大学学报(自然科学版)》浏览原始摘要信息 |
| 点击此处可从《重庆大学学报(自然科学版)》下载免费的PDF全文 |
|
