CFD analysis of the HyShot II scramjet combustor |
| |
Authors: | C Fureby M Chapuis E Fedina S Karl |
| |
Institution: | aDefense Security Systems Technology, The Swedish Defense Research Agency – FOI, SE 147 25 Tumba, Stockholm, Sweden;bInstitute of Aerodynamics and Flow Technology, German Aerospace Center, DLR, 37073 Goettingen, Germany |
| |
Abstract: | The development of novel air-breathing engines such as supersonic combustion ramjets (scramjets) depends on the understanding of supersonic mixing, self-ignition and combustion. These aerothermochemical processes occur together in a scramjet engine and are notoriously difficult to understand. In the present study, we aim at analyzing the HyShot II scramjet combustor mounted in the High Enthalpy Shock Tunnel Göttingen (HEG) by using Reynolds Averaged Navier Stokes (RANS) and Large Eddy Simulation (LES) models with detailed and reduced chemistry. To account for the complicated flow in the HEG facility a zonal approach is adopted in which RANS is used to simulate the flow in the HEG nozzle and test-section, providing the necessary inflow boundary conditions for more detailed RANS and LES of the reacting flow in the HyShot combustor. Comparison of predicted wall pressures and heat fluxes with experimental data show good agreement, and in particular does the LES agree well with the experimental data. The LES results are used to elucidate the flow, mixing, self-ignition and subsequent combustion processes in the combustor. The combustor flow can be separated into the mixing zone, in which turbulent mixing from the jet-in-cross flow injectors dominates, the self-ignition zone, in which self-ignition rapidly takes place, and the turbulent combustion zone, located towards the end of the combustor, in which most of the heat release and volumetric expansion takes place. Self-ignition occurs at some distance downstream of the injectors, resulting in a distinct pressure rise further downstream due to the volumetric expansion as observed in the experiments. The jet penetration is about 30% of the combustor height and the combustion efficiency is found to be around 83%. |
| |
Keywords: | Scramjet HyShot II wind-tunnel experiments Large Eddy Simulation Supersonic mixing Self-ignition |
本文献已被 ScienceDirect 等数据库收录! |
|