| 强流电子束引出窗风冷数值模拟 |
| |
| 引用本文： | 何小海,林理彬,肖德鑫.强流电子束引出窗风冷数值模拟[J].强激光与粒子束,2009,21(3). |
| |
| 作者姓名： | 何小海 林理彬 肖德鑫 |
| |
| 作者单位： | 1．四川大学 物理科学与技术学院， 成都 610064; 2.中国工程物理研究院 环保工程研究中心， 四川 绵阳 621900 |
| |
| 摘 要： | 研究了1.2 MW大功率电子加速器引出窗钛膜受力状况，确定其工作温度必须控制在150 ℃以内。此温度下，热传导和热辐射的散热作用可以忽略，强迫风冷是唯一的散热途径。用流体模拟计算软件分析了钛膜冷却效果与出口风速和距离之间的关系，分析回流区的存在及其影响，并对引出窗结构做了初步优化。模拟了附加隔离窗形成的封闭空间对引出窗风冷的影响，模拟结果为：提出的非均布扫描方式可以将引出窗输出能力提升76%。
|
| 关 键 词： | 引出窗 附壁射流 强迫风冷 热传导 热辐射 |
| 收稿时间： | 1900-01-01; |
Numerical simulation of wind-cooling electron beam extraction window |
| |
| He Xiaohai,Lin Libin,Xiao Dexin.Numerical simulation of wind-cooling electron beam extraction window[J].High Power Laser and Particle Beams,2009,21(3). |
| |
| Authors: | He Xiaohai Lin Libin Xiao Dexin |
| |
| Institution: | 1. The College of Physical Science and Technology, Sichuan University, Chengdu 610064, China;2. Institute of Environmental Protection Engineering, CAEP, P.O.Box 919-826, Mianyang 621900, China |
| |
| Abstract: | The situation of titanium foil of high power electron accelerator (1.2 MW)extraction window was studied, because the operating temperature of titanium foil should be controlled within 150 ℃, forced air cooling is the only way to disperse the heat (under such temperature, the effects of heat dispersion of heat radiation and conduction can be neglected). With the fluid analog software (Fluent), the relationships among cooling efficiency of titanium foil, initial air velocity and distance, existence of refluent zone and its affects were analysed, also the structure of extraction window was primarily optimized. Additionally, simulation analysis was made on the closed space formed by additional protective window. Non-homogenous-distribution scanning has been proved that the output capacity of |
| |
| Keywords: | wall jet forced air-cooling heat transfer heat radiation |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
| 点击此处可从《强激光与粒子束》下载免费的PDF全文 |
|
