首页 | 本学科首页   官方微博 | 高级检索  
     

X射线荧光光谱法测定高含量有机碳样品中的钾、钠、钙、镁、硅、铝、铁、钛、锰、磷
引用本文:李亚,王英凯,张旭,张振华. X射线荧光光谱法测定高含量有机碳样品中的钾、钠、钙、镁、硅、铝、铁、钛、锰、磷[J]. 中国无机分析化学, 2021, 0(2): 57-61
作者姓名:李亚  王英凯  张旭  张振华
作者单位:黑龙江省地质矿产实验测试研究中心
基金项目:大兴安岭山区生态地质调查项目(D20191014)。
摘    要:通过事先对有机碳含量较高的样品于1000℃ 下灼烧2 h,计算其烧失量,再将灼烧后的样品经Li2 B4 O7(67%)和LiBO2(33%)的混合熔剂熔融制样后,经X射线荧光光谱仪测定,能够有效地去除因有机质含量高导致的分析结果的偏差,总体的平均相对误差从11.1% 减少到了4.5%,而且较湿法化学分析节省时间.分析结...

关 键 词:有机碳  X射线荧光光谱法  熔融制样

Determination of Si,Al,Fe and Other Elements in High Organic Carbon Samples by X-ray Fluorescence Spectrometry
LI Ya,WANG Yingkai,ZHANG Xu,ZHANG Zhenhua. Determination of Si,Al,Fe and Other Elements in High Organic Carbon Samples by X-ray Fluorescence Spectrometry[J]. Chinese Journal of Inorganic Analytical Chemistry, 2021, 0(2): 57-61
Authors:LI Ya  WANG Yingkai  ZHANG Xu  ZHANG Zhenhua
Affiliation:(Heilongjiang Geological and Mineral Experimental Testing Research Center,Harbin,Heilongjiang 150036,China)
Abstract:By burning the sample 2 hours with a high organic carbon at 1000℃in advance to calculate the loss on ignition,and then melting the burned sample with Li2B4O7(67%)and LiBO2(33%)solvent to prepare the sample and measuring it with X-ray fluorescence spectrometer,it can remove the analysis results deviations caused by high organic matter content effectively,the overall average relative error was reduced from 11.1%to 4.5%and it can save time compared to wet chemical analysis.The analysis results of this method deviate from the results of wet chemical analysis very little,and the accuracy is improved greatly compared with the direct tablet analysis.
Keywords:organic carbon  X-ray fluorescence spectrometry  melting flake
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号