首页 | 本学科首页   官方微博 | 高级检索  
     

原位生长技术制备石墨烯强化铜基复合材料
引用本文:周海涛,熊希雅,罗飞,罗炳威,刘大博,申承民. 原位生长技术制备石墨烯强化铜基复合材料[J]. 物理学报, 2021, 0(8): 263-269
作者姓名:周海涛  熊希雅  罗飞  罗炳威  刘大博  申承民
作者单位:中国航发北京航空材料研究院钢与稀贵金属研究所;中国科学院物理研究所
基金项目:国家重点研发计划(批准号:2018FYA0305800);国家自然科学基金(批准号:51602300)资助的课题
摘    要:利用等离子增强化学气相沉积方法,在铜粉表面原位生长了站立石墨烯,用于制备石墨烯强化铜基复合材料.研究表明,石墨烯包覆在铜粉外表面,微观尺度实现了两者的均匀混合;生长的初期阶段,碳、氢等离子基团可将铜粉表面的氧化层还原,有助于铜粉-石墨烯之间形成良好的界面;石墨烯的成核是一个生长/刻蚀相互竞争的过程,其尺寸可受制备温度调控.利用放电等离子烧结方法将粉末压制成型,测试结果显示,添加石墨烯样品的电阻率降低了一个数量级,维氏硬度和屈服强度分别提高了15.6%和28.8%.

关 键 词:复合材料  铜粉  石墨烯  化学气相沉积

Graphene enforced copper matrix composites fabricated by in-situ deposition technique
Zhou Hai-Tao,Xiong Xi-Ya,Luo Fei,Luo Bing-Wei,Liu Da-Bo,Shen Cheng-Min. Graphene enforced copper matrix composites fabricated by in-situ deposition technique[J]. Acta Physica Sinica, 2021, 0(8): 263-269
Authors:Zhou Hai-Tao  Xiong Xi-Ya  Luo Fei  Luo Bing-Wei  Liu Da-Bo  Shen Cheng-Min
Affiliation:(Institute of Iron and Rare and Precious Metals,Beijing Institute of Aeronautical Materials,Aero Engine Corporation of China,Beijing 100095,China;Nanoscale Physics and Devices Laboratory,Institute of Physics,Chinese Academy of Sciences,Beijing 100190,China)
Abstract:Due to the outstanding mechanical and electronic properties,graphene has been widely investigated as the nano-filler for fabricating metallic matrix composites.The key point in these studies is how to realize a uniform distribution of graphene in the metallic powders.The traditional methods mainly include ball-milling and colloidal processing.However,both of them result in massive structural defects on graphene flakes and further degrade its strengthening effects.Therefore,it is meaningful to explore a new method.In this study,we present a new way,i.e.in-situ growth of graphene on copper powders in the plasma enhanced chemical vapor deposition system(PECVD).The scanning electron microscope(SEM)images indicate that the powder is fully covered by graphene nanoflakes,realizing uniform mixing on a micro-scale.Further research finds that there exists a competition between growth and etching at the initial stage of the graphene growth.Methane is dissociated into various active species(CHx,atomic H and C)by the radio frequency.The C atoms self-assemble into graphene islands,yet the H atoms tend to etch these islands away.At a lower temperature,the etching effect takes a dominant position and then only the bigger islands are able to survive in this process,resulting in bigger graphene nanoflakes.As a contrast,it is a growth-dominant process at higher temperature,resulting in a much higher nucleation density and smaller graphene sheets.Therefore,the size of graphene sheets can be well controlled by tuning the growth temperature,for example,the sizes are 300 and 100 nm at 500℃and 600℃respectively.Moreover,the X-ray photoelectron spectroscopy(XPS)spectra show that the oxide layer at the surface of copper powder can be removed as the graphene flakes grow,which contributes to a fine interface between the two parts and further leads to outstanding performance of the final composite.The powder is consolidated by spark plasma sintering(SPS)technique,and several properties of this composite are tested.The results indicate that compared with the pure copper,the copper with the addition of graphene can reduce the resistivity by one order of magnitude and increase the hardness and yield strength by 15.6%and 28.8%,respectively.This work provides an alternative way to fabricate graphene-enforced composite and shows promising application prospects.
Keywords:composite  copper powder  graphene  chemical vapor deposition
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号