| 基于P3HT空穴传输层的钙钛矿太阳能电池性能仿真研究 |
| |
| 引用本文： | 王传坤,张星,唐颖,马恒.基于P3HT空穴传输层的钙钛矿太阳能电池性能仿真研究[J].人工晶体学报,2019,48(4):646-651. |
| |
| 作者姓名： | 王传坤 张星 唐颖 马恒 |
| |
| 作者单位： | 兴义民族师范学院,兴义,562400;河南省光伏材料重点实验室,新乡,453007 |
| |
| 基金项目： | 国家自然科学基金(61540016);黔西南州科技局项目(2016-1-35);贵州省大学生创新创业项目(201710666037);贵州省教育厅基金(黔教合KY[2014]318);贵州省科技厅基金(黔科合字LH[2014]7410) |
| |
| 摘 要： | 利用AMPS-1D软件对钙钛矿太阳能电池性能进行仿真。研究发现,当P3HT厚度500 nm时,钙钛矿太阳能电池的短路电流密度Jsc=18. 995 m A/cm^2,光电转换效率Eff=17. 425%,填充因数FF=0. 824,开路电压Voc=1. 113 V。钙钛矿太阳能电池的光吸收层厚度为400 nm时,钙钛矿太阳能的光电转化效率最大。钙钛矿太阳能电池开路电压、短路电流密度、填充因数和光电转化效率等性能随着阴极材料功函数的增大而减。通过理论计算对制备高性能的太阳能电池具有指导性作用。
|
| 关 键 词： | 钙钛矿太阳能电池 缓冲层 空穴传输 仿真 |
Simulation of Perovskite Solar Cell Performance with P3HT as Hole Transport Layer |
| |
| WANG Chuan-kun,ZHANG Xing,TANG Ying,MA Heng.Simulation of Perovskite Solar Cell Performance with P3HT as Hole Transport Layer[J].Journal of Synthetic Crystals,2019,48(4):646-651. |
| |
| Authors: | WANG Chuan-kun ZHANG Xing TANG Ying MA Heng |
| |
| Institution: | (Xingyi Normal University for Nationalities, Xingyi 562400, China;Henan Key Laboratory of Photovoltaic Materials, Xinxiang 453007, China) |
| |
| Abstract: | The performance of perovskite solar cell was simulated by the AMPS-1D software. The results were showed that performance of perovskite solar cell were J sc =18.995 mA/cm 2, E ff =17.425%, FF =0.824 and V oc = 1.113 V, when the P3HT thickness was 500 nm.The thickness of light absorption layer of perovskite solar cell was 400 nm, the photoelectric conversion efficiency of perovskite solar cell was the highest. The opening voltage, short circuit current density, filling factor and photoelectric conversion efficiency of perovskite solar cell decreased with the increasing of cathode material work function. It has instructive significance to prepare high-performance perovskite solar cell. |
| |
| Keywords: | perovskite solar cell buffer layer hole transport simulation |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《人工晶体学报》浏览原始摘要信息 |
| 点击此处可从《人工晶体学报》下载免费的PDF全文 |
|
