Measurement of rapid crack propagation in pressure pipes: A static S4 approach

A method for creating rapid crack propagation in pressurized pipes under slow static loading using modified S4 apparatus is described. In the development of the method a complexity involved with dynamic loading in the S4 test (ISO 13477) is eliminated by the use of a displacement controlled static loading machine. The experimental system consisted of an universal testing machine, a low compliance wedge loading device, notch tip quenching apparatus and a pipe specimen where a through thickness hole is drilled to accommodate the wedge loading device. The pipe specimen is made in such a way that a section containing a hole is free from the internal pressure, while the rest of the specimen is made to carry the internal pressure which would eventually drive the unstable crack along the pipe axis. The idea of such rapid crack initiation under static loading was derived from the concept of time-temperature equivalence, where impact loading may in part be simulated by lowering the temperature at the site of rapid crack initiation. The details of the method for rapid crack propagation under static loading are described and the correlation of the results to rapid crack propagation obtained by ISO 13477 is illustrated. The two methods were shown to compare quite well in terms of critical pressure determination and the details regarding normalized rapid crack length versus the internal pressure curve as well as the crack propagation pattern.