Determination of gold in biological materials by electrothermal atomic absorption spectrometry with a molybdenum tube atomizer

Electrothermal atomic absorption spectrometry (ETA-ASS) of gold with a molybdenum tube atomizer has been investigated. A sensitive ETA-AAS method was developed. The gold absorption signal became higher with the heating rate of the tube atomizer and as the ratio of hydrogen in the argon purge gas decreased. The optimal heating rate and the optimal gas flow rate were 5.5 C/msec and Ar 480 ml/min + H(2) 20 ml/min, respectively. The absolute characteristic mass (the mass of element giving 0.0044 abs.) of gold by the atomizer was 1.8 pg and the detection limit was 130 pg/ml (3S/N). These values were > 10 times better than those obtained with graphite atomizers, ICP and ICP-MS. The interferences caused by large amounts of interferents were evaluated. The addition of thiourea served to eliminate severe interferences. The recovery of spiked gold in biological materials was in the range of 101-106%.