Effects of aspect ratio on the drag of a wall-mounted finite-length cylinder in subcritical and critical regimes

The effect of cylinder aspect ratio (??H/d, where H is the cylinder height or length, and d is the cylinder diameter) on the drag of a wall-mounted finite-length circular cylinder in both subcritical and critical regimes is experimentally investigated. Two cases are considered: a smooth cylinder submerged in a turbulent boundary layer and a roughened cylinder immersed in a laminar uniform flow. In the former case, the Reynolds number Re _d (??U _?? d/??, with U _?? being the free-stream velocity and ?? the fluid viscosity) was varied from 2.61?×?10⁴ to 2.87?×?10⁵, and two values of H/d (2.65 and 5) were examined; in the latter case, Re _d ?=?1.24?×?10⁴?C1.73?×?10⁵ and H/d?=?3, 5 and 7. In the subcritical regime, both the drag coefficient C _D and the Strouhal number St are smaller than their counterparts for a two-dimensional cylinder and reduce monotonously with decreasing H/d. The presence of a turbulent boundary layer causes an early transition from the subcritical to critical regime and considerably enlarges the Re _d range of the critical regime. No laminar separation bubble occurs on the finite-length cylinder immersed in the turbulent boundary layer, and consequently, the discontinuity is not observed in the C _D?CRe _d and St?CRe _d curves. In the roughened cylinder case, the Re _d range of the critical regime grows gradually with decreasing H/d, while the C _D crisis becomes less obvious. In both cases, H/d has a negligible effect on the critical value of Re _d at which transition occurs from the subcritical to critical regime.