| 铣削高强度钛合金TC18的刀具磨损机理 |
| |
| 引用本文： | 王其琛,明伟伟,安庆龙,陈明.铣削高强度钛合金TC18的刀具磨损机理[J].上海交通大学学报,2011,45(1):19-0024. |
| |
| 作者姓名： | 王其琛 明伟伟 安庆龙 陈明 |
| |
| 作者单位： | （上海交通大学 机械与动力工程学院， 上海 200240）
|
| |
| 基金项目： | 国家自然科学基金重点项目(50935001,U0734007); 国家科技重大专项课题(2009ZX04014-041); 国家高技术研究发展计划(863)项目(2009AA04Z150) |
| |
| 摘 要： | 采用无涂层和PVD涂层硬质合金可转位刀具对高强度钛合金TC18进行铣削加工，研究了钛合金TC18铣削加工过程中刀具的磨损形态和磨损机理.结果表明：在相同的加工条件下，采用PVD涂层硬质合金刀具加工TC18钛合金的寿命较长，前刀面主要磨损机理为黏结磨损和扩散磨损等，刀具失效形式为涂层剥落和随之而来的前刀面月牙洼磨损，后刀面除了黏结磨损和扩散磨损以外，还发生了磨粒磨损；无涂层硬质合金刀具的寿命较短，刀具的失效形式为崩刃.
|
| 关 键 词： | 高强度钛合金 铣削 刀具 磨损机理 |
| 收稿时间： | 2010-5-12 |
Wear Mechanism of Tool in Milling High-Strength Titanium Alloy TC18 |
| |
| WANG Qi-chen,MING Wei-wei,AN Qing-long,CHEN Ming.Wear Mechanism of Tool in Milling High-Strength Titanium Alloy TC18[J].Journal of Shanghai Jiaotong University,2011,45(1):19-0024. |
| |
| Authors: | WANG Qi-chen MING Wei-wei AN Qing-long CHEN Ming |
| |
| Institution: | (School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China)
|
| |
| Abstract: | As TC18 is difficult to machine, the cutting speed and tool life are the main obstructions to improve the production efficiency and manufacturing cost control when machining TC18. This paper presented the tool wear pattern and tool wear mechanism of milling TC18. The results show that in the same cutting parameters, the carbide tool with PVD coating (TiN+TiAlN) has longer tool life than uncoated tool, the wear pattern is cater for diffusion and adhesive in the rake face after coating desquamated; while the wear pattern of uncoated tool is tipping. |
| |
| Keywords: | high-strength titanium alloy milling tool wear mechanism |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《上海交通大学学报》浏览原始摘要信息 |
| 点击此处可从《上海交通大学学报》下载免费的PDF全文 |
