首页 | 本学科首页   官方微博 | 高级检索  
     检索      

电化学阻抗谱法研究Cu6Sn5合金负极相变过程
引用本文:樊小勇,a,b 庄全超b 魏国祯b 柯福生b 黄 令b
董全峰b 孙世刚,b
.电化学阻抗谱法研究Cu6Sn5合金负极相变过程[J].化学学报,2009,67(14):1547-1552.
作者姓名:樊小勇  a  b 庄全超b 魏国祯b 柯福生b 黄 令b
董全峰b 孙世刚
  b
作者单位:(a长安大学材料科学与工程学院 西安 710061) ;(b厦门大学化学化工学院化学系 固体表面物理化学国家重点实验室 厦门 361005) ;
摘    要:以粗糙铜箔为基底, 采用一步电沉积法获得Cu-Sn合金, X射线衍射(XRD)测试结果显示其主要为Cu6Sn5合金相. 扫描电子显微镜(SEM)测试结果表明该合金表面由大量“小岛”组成, 且每个“小岛”上存在大量纳米合金粒子. 充放电测试结果表明, 以该合金为锂离子电池负极, 其初始放电(嵌锂)和充电(脱锂)容量分别为461和405 mAh•g-1. 电化学阻抗谱测试结果显示, Cu6Sn5合金电极在阴极极化过程中分别出现了代表固体电解质界面膜(SEI膜)阻抗、电荷传递阻抗和相变阻抗的圆弧, 并详细分析了它们的变化规律.

关 键 词:锂离子电池  负极  Cu6Sn5合金  电化学阻抗谱  相变
收稿时间:2008-10-30
修稿时间:2008-12-26

Electrochemical Impedance Spectroscopy Study on Phase Transformation of Cu6Sn5 Alloy Anode
Institution:(a School of Materials Science and Engineering, Chang’an University, Xi’an 710061)
(b State Key Laboratory for Physical Chemistry of Solid Surfaces, Department of Chemistry, College of Chemistry and
Chemical Engineering, Xiamen University, Xiamen 361005)
Abstract:The Cu-Sn alloy electrode was prepared by a one-step electrodepositing method using rough Cu foil as the substrate, and was determined as the intermetallic composite of Cu6Sn5 using an X-ray diffraction (XRD) method. The electrode surface morphology was analyzed by scanning electron microscopy (SEM) which displayed “small islands” structure with many nano-particles on it. The first discharge and charge capacities were determined as 461 and 405 mAh•g-1, respectively. Electrochemical impedance spectra (EIS) indicated that there appeared three arcs in the Nyquist plots respectively representing the impedance of solid electrolyte interphase film, charge transfer and phase transformation in the first lithiation, and their evolutive principles were also investigated.
Keywords:lithium ion battery  anode  Cu6Sn5 alloy  electrochemical impedance spectroscopy  phase transformation
点击此处可从《化学学报》浏览原始摘要信息
点击此处可从《化学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号