Effect of sample matrix on the determination of total petroleum hydrocarbons (TPH) in soil by gas chromatography–flame ionization detection

Research papers in different fields of analytics indicate that the effect of matrix-induced chromatographic response enhancement (matrix effect) is a commonly encountered problem in gas chromatography applications. In this paper, an example of the effect of sample matrix on the quantitative determination of total petroleum hydrocarbons (TPH) by GC–FID in soil is presented. Two types of soil were selected for the evaluation. Extraction and analysis of the soil samples was in accordance with CEN prEN 14039. The relative systematic error resulting from the matrix effect was obtained for three different TPH concentrations by statistical comparison of the slopes of the matrix-matched calibration lines and a pure solvent calibration line. Too high TPH concentrations were obtained when conventional solvent calibration was used for quantitation. This demonstrates that matrix-matched calibration should be exploited in the determination of petroleum hydrocarbons in soil samples. However, there was also significant enhancement of the response due to an interfering matrix with decreasing analyte concentration. Enhancement seems to be especially evident in the quantification of TPH over the concentration range encountered in polluted environments. As a result, even when matrix-matched calibration is used for quantitation, it is still necessary to establish the range over which a linear response can be expected. Otherwise too high results for sample TPH concentrations will be obtained.