首页 | 本学科首页   官方微博 | 高级检索  
     检索      

机抖激光捷联惯导系统静态圆锥运动形成机理
引用本文:姚建军.机抖激光捷联惯导系统静态圆锥运动形成机理[J].中国惯性技术学报,2007,15(6):725-729.
作者姓名:姚建军
作者单位:北京自动化控制设备研究所,北京,100074
摘    要:以三轴机械抖动激光陀螺捷联惯导系统为研究对象,利用数值仿真方法,详细讨论了静态环境条件下圆锥运动的形成机理以及机械抖动激光陀螺的惯性参数对惯导系统圆锥运动的影响规律。研究认为,在静态环境条件下,惯导系统的质量分布特性不是产生圆锥运动的原因;惯导系统在静态环境条件下出现的圆锥运动是由于机械抖动陀螺抖动机构的三类不平衡——静不平衡、动不平衡和配不平衡造成的。

关 键 词:捷联惯导系统  机械抖动激光陀螺  圆锥运动  数值仿真
文章编号:1005-6734(2007)06-0725-05
修稿时间:2007年8月8日

Formation mechanism for static conning motion of mechanically dithered ring laser gyro SINS
YAO Jian-jun.Formation mechanism for static conning motion of mechanically dithered ring laser gyro SINS[J].Journal of Chinese Inertial Technology,2007,15(6):725-729.
Authors:YAO Jian-jun
Abstract:Taking three-axis dithered laser SINS as research object and using numerical simulation method,the formation mechanism of conning motion under static environment condition and the affection of the gyro's inertial parameters on its conning motion were discussed.It is found that the mass distribution characteristics of SINS are not the causation of coning motion.Instead it is the three kinds of unbalances(i.e.static unbalance,dynamic unbalance and counter unbalance)in dithering mechanism that cause the coning motion in static environment condition.
Keywords:SINS  mechanically dithered ring laser gyro  conning motion  numerical simulation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号