| 激光CCD复合测量方法在ICF靶丸球度误差检测中的应用 |
| |
| 引用本文： | 费致根,郭俊杰,马小军,高党忠. 激光CCD复合测量方法在ICF靶丸球度误差检测中的应用[J]. 强激光与粒子束, 2011, 23(4). DOI: 10.3788/HPLPB20112304.0995 |
| |
| 作者姓名： | 费致根 郭俊杰 马小军 高党忠 |
| |
| 作者单位： | 1. 西安交通大学 机械制造系统工程国家重点实验室， 西安 710049；2. 郑州轻工业学院 机电学院测控教研室， 郑州 450002；3. 中国工程物理研究院 激光聚变研究中心， 四川 绵阳 621900 |
| |
| 摘 要： | 提出一种基于激光与CCD的复合式测量方法，结合二者的优势，通过测量同一标准球球心的位置标定出了二者光轴的位置关系，有效地把二者测量的数据融合到同一个坐标系中，从而实现高精度的3维测量。在对所测靶丸表面数据进行去噪处理后，采用拟牛顿法，以CCD所测惯性约束聚变(ICF)靶丸直径作为部分待求参数的初始值，可以有效避免该方法容易陷入局部最优化的缺陷。从而快速、准确地实现靶丸球度误差的测量。分别在两种测量模式下进行了实验，结果验证了该方法的有效性与鲁棒性。
|
| 关 键 词： | 惯性约束聚变 靶丸球度误差 复合式测量 误差补偿 拟牛顿法 |
| 收稿时间： | 1900-01-01; |
Application of compound measuring method with laser and CCD to sphericity error detection of ICF target |
| |
| Fei Zhigen,Guo Junjie,Ma Xiaojun,Gao Dangzhong. Application of compound measuring method with laser and CCD to sphericity error detection of ICF target[J]. High Power Laser and Particle Beams, 2011, 23(4). DOI: 10.3788/HPLPB20112304.0995 |
| |
| Authors: | Fei Zhigen Guo Junjie Ma Xiaojun Gao Dangzhong |
| |
| Affiliation: | 1. State Key Laboratory for Manufacturing Systems Engineering, Xi’an Jiaotong University, Xi’an 710049, China;2. Mechanical and Electrical Engineering Department, Zhengzhou University of Light Industry, Zhengzhou 450002, China;3. Research Center of Laser Fusion, CAEP, P.O.Box 919-986, Mianyang 621900, China |
| |
| Abstract: | A novel compound measuring method for sphericity error detection of ICF target is proposed. Combining the advantages of laser probe and CCD camera, this method can effectively integrate the data captured by laser probe and CCD camera into the same coordinate system by means of calibrating the position relationship of the two optical axes with a standard ball. The quasi-Newton method is employed to process the measured data with the noise data eliminated. Meanwhile, the diameter of target derived by CCD camera is used as partial initial conditions, which prevents the occurrence of local optimization due to inappropriate initial parameter selection. The experiment has been carried out on the experiment platform of a compact five-coordinate measuring machine under two kinds of measuring mode, |
| |
| Keywords: | target sphericity error compound measurement error compensation quasi-Newton method |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
|
点击此处可从《强激光与粒子束》下载免费的PDF全文 |
