Fabrication and characterization of polymer thermo-optic switch based on mmi coupler |
| |
Authors: | Abdulaziz M Al-hetar Abu Bakar Mohammad Zaid A Shamsan |
| |
Institution: | a Communications and Computer Department, Faculty of Engineering and Information Technology, Taiz University, Taiz, Yemenb Photonics Technology Center (PTC), Infocomm Research Alliance (IcRA), University Technology Malaysia (UTM), 81310 Johor, Malaysia |
| |
Abstract: | The 2 × 2 polymer thermo-optic switch based on MMI coupler is realized. This device is fabricated using standard fabrication techniques such as coating, photolithography, and dry etching. A crosstalk level of −36.2 dB is achieved at cross and bar states. A power consumption of 1.85 mW is applied to change the state of the switch from the cross to the bar state. A switching time of less than 0.7 ms is traced to change a state of the realized switch. |
| |
Keywords: | Multimode interference coupler Polymer technology Thermo-optic switch |
本文献已被 ScienceDirect 等数据库收录! |
|