Flow injection analysis of sulfite ion with a potentiometric titanium phosphate-epoxy based membrane sensor

A novel pH sensor suitable for use in both aqueous and non-aqueous mediums is reported. The sensor is derived from polymer modified electrode obtained from electrochemical polymerisation of aniline in dry acetonitrile containing 0.5 M tetraphenyl borate at 2.0 V versus Ag/AgCl. The light yellow colour polymer modified electrode obtained under the present experimental condition has been characterised by scanning electron microscopy (SEM). The pH sensing of polymer modified electrode in both aqueous and non-aqueous mediums is examined and reported. As the typical examples, we used weak acid (acetic acid) and weak base (ammonium hydroxide) as analytes. The acetic acid is analysed in both aqueous and dry acetonitrile whereas ammonium hydroxide is analysed only in aqueous medium. The analysis in aqueous medium is conducted in 1 mM Tris-HCl buffer pH 7.0 and also in 0.1 M KCl. The slope of pH sensing is calculated from the data recorded in typical buffers and found to be approximately 86 mV per pH. The application of polymer modified electrode for the construction of urea biosensor is described based on immobilised urease within poly vinyl alcohol (PVA) matrix and also within organically modified sol-gel glass on the surface of polymer-modified electrode. The new urea sensor has shown maximum response of 160 mV at 25 degrees C with a lowest detection limit of 20 muM. The performance of new pH sensor and urea sensor has been studied and reported in this communication.