| 爆炸焊接斜碰撞过程的数值模拟 |
| |
| 引用本文： | 李晓杰,莫非,闫鸿浩,张程娇.爆炸焊接斜碰撞过程的数值模拟[J].高压物理学报,2011,25(2). |
| |
| 作者姓名： | 李晓杰 莫非 闫鸿浩 张程娇 |
| |
| 作者单位： | 大连理工大学工程力学系工业装备结构分析国家重点实验室，辽宁大连 116023 |
| |
| 摘 要： | 借助动力学分析软件ANSYS/LS-DYNA 11.0，建立了考虑材料强度的流体弹塑性力学模型，运用光滑粒子流体动力学（SPH）方法，对爆炸焊接斜碰撞过程进行了数值模拟。界面波和射流的模拟结果与爆炸焊接生产实际中的现象较为吻合，说明采用SPH方法对爆炸焊接斜碰撞过程进行模拟研究是有科学价值的。
|
| 关 键 词： | 爆炸焊接 斜碰撞 界面波 光滑粒子流体动力学方法 流体弹塑性力学模型 射流 |
| 收稿时间： | 2010-03-09; |
Numerical Simulation of the Oblique Collision in Explosive Welding |
| |
| LI Xiao-Jie,MO Fei,YAN Hong-Hao,ZHANG Cheng-Jiao.Numerical Simulation of the Oblique Collision in Explosive Welding[J].Chinese Journal of High Pressure Physics,2011,25(2). |
| |
| Authors: | LI Xiao-Jie MO Fei YAN Hong-Hao ZHANG Cheng-Jiao |
| |
| Institution: | State Key Laboratory of Structural Analysis for Industrial Equipment, Department of Engineering Mechanics, Dalian University of Technology, Dalian 116023, China |
| |
| Abstract: | Using the software of ANSYS/LS-DYNA 11.0 and the method of smoothed particle hydrodynamics (SPH), the formation process of the oblique collision in explosive welding was simulated, where the elastic-plastic hydrodynamic model with the material strength was used. The simulation results showed that the shapes of the interface wave and the metal jet were consistent with the practical phenomena of explosive welding. Therefore, it is valuable to research the formation process of the oblique collision in explosive welding with SPH method. |
| |
| Keywords: | explosive welding oblique collision interface wave SPH method elastic-plastic hydrodynamic model jet |
|
| 点击此处可从《高压物理学报》浏览原始摘要信息 |
| 点击此处可从《高压物理学报》下载免费的PDF全文 |
