GaP layers grown on GaN with and without buffer layers

The growth of GaP layer on GaN with and without buffer layers by metal-organic chemical vapour deposition (MOCVD) has been studied. Results indicate that the GaP low temperature buffer layer can provide a high density of nucleation sites for high temperature (HT) GaP growth. These sites can promote the two-dimensional (2D) growth of HT GaP and reduce the surface roughness. A GaP single crystal layer grown at 680 du is obtained using a 40-nm thick GaP buffer layer. The full-width at half-maximum (FWHM) of the (111) plane of GaP layer, measured by DCXRD, is 560 arcsec. The GaP layer grown on GaN without low temperature GaP buffer layer shows a rougher surface. However, the FWHM of the (111) plane is 408 arcsec, which is the indication of better crystal quality for the GaP layer grown on GaN without a low temperature buffer layer. Because it provides less nucleation sites grown at high growth temperature, the three-dimensional (3D) growth is prolonged. The crystalline quality of GaP is lightly improved when the surface of GaN substrate is pretreated by PH_3, while it turned to be polycrystalline when the substrate is pretreated by TEGa.