Kinetics of corrosion and dissolution of uranium dioxide as a function of pH

A continuous flow-through reactor with a thin layer of solid particles (size ranging from 100 to 300 μm) was used to obtain a deeper knowledge on the mechanism of dissolution of UO₂ under oxidizing conditions. Using this methodology the dissolution rate of uranium dioxide was determined at three different oxygen partial pressures (5, 21, and 100% in nitrogen) and as a function of pH (between 3 and 12) in a noncomplexing medium. From the results of these experiments the following rate equation was derived: In addition, XPS characterizations were performed to determine the U(IV)/U(VI) ratio on the solid surface at different experimental times and conditions. These results showed that at acidic conditions (pH below 6.7) the final solid surface presents a stoichiometry close to UO₂, while at alkaline conditions the final solid surface average composition is close to UO_2.25. This information was integrated with the results of the leaching experiments to present a model for the mechanism of dissolution of uranium dioxide under the experimental conditions. © 1997 John Wiley & Sons, Inc. Int J Chem Kinet 29: 261–267, 1997.