Transmission electron microscopy observation of GaAs/Al0.3Ga0.7As T-shaped quantum well structure fabricated by glancing angle molecular beam epitaxy on GaAs(100) reverse-mesa etched substrates

GaAs/Al_0.3Ga_0.7As multi-layer structures were grown on GaAs (100) reverse-mesa etched substrates by glancing angle molecular beam epitaxy (GA-MBE). A(111)B facet was formed as a side-facet. Surface migration of Ga and Al atoms from the (100) flat region to the (111)B side-facet region has been investigated to fabricate T-shaped GaAs/AlGaAs quantum wells (QWs) under the condition that Ga and Al atoms impinge only an the (100) flat region and do not impinge on the (111)B side-facet. Observation of T-shaped GaAs/AlGaAs quantum wires (QWRs) by cross-sectional transmission electron microscopy (TEM) revealed that there is no migration of Al atoms from the (100) to the (111)B facet region at a substrate temperature (T_s) as high as 630°C, under a V/III ratio of 28 (in pressure ratio). On the other hand, very thin GaAs epitaxial layers grown on the (111)B side-facet region owing to the Ga migration were observed for substrate temperatures of 600 and 630°C. It was found that the mass flow of Ga atoms from the (100) region to the (111)B side-facet region increases, with the thermal activation energy of 2.0 eV, as the substrate temperature increases from 570 to 630°C. The GA-MBE growth on a reverse-mesa etched GaAs substrate at a low temperature 570°C or lower is desirable to fabricate a nm-scale GaAs/AlGaAs QWR structure with nm-scale precision.