首页 | 本学科首页   官方微博 | 高级检索  
     检索      

一种新型复合微孔聚合物电解质及其与锂离子电池负极相容性研究
引用本文:陈作锋,姜艳霞,许金梅,庄全超,黄令,董全峰,孙世刚.一种新型复合微孔聚合物电解质及其与锂离子电池负极相容性研究[J].高等学校化学学报,2006,27(10):1937-1940.
作者姓名:陈作锋  姜艳霞  许金梅  庄全超  黄令  董全峰  孙世刚
作者单位:厦门大学化学化工学院化学系,固体表面物理化学国家重点实验室,厦门361005;厦门大学化学化工学院化学系,固体表面物理化学国家重点实验室,厦门361005;厦门大学化学化工学院化学系,固体表面物理化学国家重点实验室,厦门361005;厦门大学化学化工学院化学系,固体表面物理化学国家重点实验室,厦门361005;厦门大学化学化工学院化学系,固体表面物理化学国家重点实验室,厦门361005;厦门大学化学化工学院化学系,固体表面物理化学国家重点实验室,厦门361005;厦门大学化学化工学院化学系,固体表面物理化学国家重点实验室,厦门361005
基金项目:国家重点基础研究发展计划(973计划);国家自然科学基金
摘    要:以介孔分子筛SBA-15为造孔剂和填料, 研究出一种无需使用增塑剂制备复合微孔型聚合物电解质(SBA-15 CMPE)的新方法. 组装Li/SBA-15 CMPE/Li对称电池, 并利用电化学阻抗谱(EIS)技术研究了存放时间、循环伏安(CV)扫描、恒电流极化以及环境温度等对Li/SBA-15 CMPE界面性质的影响. 通过将成膜浆料直接浇铸在用水性粘合剂制备的中间相微球碳(MCMB)电极片上, 制备附有SBA-15 CMPE的一体化电极(MCMB/SBA-15 CMPE). 用该MCMB/SBA-15 CMPE所组装的三电极模拟电池具有良好的循环性能, EIS研究揭示了其首次阴极极化过程中碳电极上SEI膜的形成、生长和稳定的过程.

关 键 词:锂离子电池  微孔型聚合物电解质  SBA-15介孔分子筛  界面性质
文章编号:0251-0790(2006)10-1937-04
收稿时间:10 28 2005 12:00AM
修稿时间:2005-10-28

Compatibility of a Novel Composite Microporous Polymer Electrolyte with Anode of Li-ion Batteries
CHEN Zuo-Feng,JIANG Yan-Xia,XU Jin-Mei,ZHUANG Quan-Chao,HUANG Ling,DONG Quan-Feng,SUN Shi-Gang.Compatibility of a Novel Composite Microporous Polymer Electrolyte with Anode of Li-ion Batteries[J].Chemical Research In Chinese Universities,2006,27(10):1937-1940.
Authors:CHEN Zuo-Feng  JIANG Yan-Xia  XU Jin-Mei  ZHUANG Quan-Chao  HUANG Ling  DONG Quan-Feng  SUN Shi-Gang
Institution:State Key Lab for Physical Chemistry of Solid Surfaces, Department of Chemistry, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005, China
Abstract:In this paper,a novel composite microporous polymer electrolyte that is made of poly(vinylidene fluoride-co-hexafluoropropylene)(PVdF-HFP)and mesoporous SBA-15 was prepared(designated as SBA-15 CMPE).Electrochemical impedance spectroscopy(EIS)was applied to investigate the effects of the storage time,cyclic voltammetry(CV)measurement,constant current polarization and ambient temperature on the Li/SBA-15 CMPE interface properties.The polymer film composite integrative electrode(designated as MCMB/SBA-15 CMPE)was prepared through a process that the membrane solution was cast directly on the mesocarbon microbead(MCMB)electrode with water-solubility bond.The result of CV shows that the model cell with three-electrode based on the MCMB/SBA-15 CMPE displayed a good cyclical performance.The EIS result reveals the process of formation,growth and stabilization of solid electrolyte interphase(SEI)film on MCMB/SBA-15 CMPE electrode during the first cathodic polarization.
Keywords:Li-ion battery  Microporous polymer electrolyte  Mesoporous SBA-15 molecular sieve  Interface property
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《高等学校化学学报》浏览原始摘要信息
点击此处可从《高等学校化学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号