Strain hardening of polycarbonate in the glassy state: Influence of temperature and molecular weight

This study is concerned with the temperature and molecular weight dependence of the strain-hardening behavior of polycarbonate. It is shown that the strain-hardening modulus reduces with increasing temperature and decreasing molecular weight. This result is interpreted in terms of temperature accelerated relaxation of the entanglement network. Moreover, it is shown that frozen-in orientations, induced by homogeneous deformations above the glass transition temperature, lead to anisotropic yield behavior that can be fully rationalized (and modelled) in terms of a superimposed stress contribution of the prestrained network. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2041–2049, 2004     

3004铝合金“反常”锯齿屈服现象的研究

在应变速率为5.56×10^-5s^-1—5.56×10^-3s^-1的范围内，在不同温度下(从223K至773K)，对3004铝合金进行系列拉伸试验，探索其锯齿屈服规律；通过激活能的计算、内耗研究、微观组织观察和能谱分析，探讨锯齿屈服的机理与物理本质.结果表明，3004铝合金在形变过程中会出现动态应变时效现象；发现了一种“反常”的锯齿屈服现象：在出现锯齿屈服的温区内，存在锯齿屈服临界应变量转变温度T_t， 关键词： 动态应变时效 锯齿屈服 铝合金 内耗     

自流平材料的流变学分析

从流变方程的角度详细分析了影响自流平材料流动度的因素，主要讨论了颗粒级配、颗粒形状以及减水剂对流变性的影响。从理论上证了W型自流平材料的合理性。     

Shear and extensional rheology of entangled polymer melts: Similarities and differences

This work extends our previous understanding concerning the nonlinear responses of entangled polymer solutions and melts to large external deformation in both simple shear and uniaxial extension. Many similarities have recently been identified for both step strain and startup continuous deformation, including elastic yielding, i.e., chain disentanglement after cessation of shear or extension, and emergence of a yield point during startup deformation that involves a deformation rate in excess of the dominant molecular relaxation rate. At a sufficiently high constant Hencky rate, uniaxial extension of an entangled melt is known to produce window-glass-like rupture. The present study provides evidence against the speculation that chain entanglements tie up into "dead knots" in constant-rate extension because of the exponentially growing chain stretching with time. In particular, it is shown that even Instron-style tensile stretching, i.e., extending a specimen by applying a constant velocity on both ends, results in rupture. Yet, in the same rate range, the same entangled melt only yields in simple shear, and the resulting shear banding is clearly not a characteristic of rupture. Thus, we conclude that chain entanglements respond to simple shear in the manner of yielding whereas uniaxial extension is rather effective in causing some entanglements to lock up, making it impossible for the entanglement network to yield at high rates.     

Comparing the mechanical response of di‐, tri‐, and tetra‐functional resin epoxies with reactive molecular dynamics

The influence of monomer functionality on the mechanical properties of epoxies is studied using molecular dynamics (MD) with the Reax Force Field (ReaxFF). From deformation simulations, the Young's modulus, yield point, and Poisson's ratio are calculated and analyzed. Comparison between the network structures of distinct epoxies is further advanced by the monomeric degree index (MDI). Experimental validation demonstrates the MD results correctly predict the relationship in Young's moduli. Therefore, ReaxFF is confirmed to be a useful tool for studying the mechanical behavior of epoxies. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 255–264     

离石区玉米高产创建展示措施与体会

离石区通过实施玉米高产创建示范展示,实现了玉米产量持续高产。     

A Preferred Synthesis of 1,2,4‐Oxadiazoles

Abstract

An efficient and high‐yielding one‐pot synthesis of 1,2,4‐oxadiazoles from carboxylic acids and amidoximes is described. Activation of the carboxylic acid using hydroxybenzotriazole (HOBt) and EDC/HCl followed by reaction with an amidoxime generates an oxime ester. Without isolation, the oxime ester is dehydrated to give the oxadiazole ring.     

Monitoring abiotic degradation of branched polyethylenes formulated with pro-oxidants through different mechanical tests

The mechanical properties of two linear low density and low density polyethylenes containing a pro-oxidant additive were monitored during accelerated aging (60 °C in a convection oven) and weather exposure. Tearing tests (trouser) were performed for the first time in polyethylenes subjected to oxo-degradation revealing a transition from an extensible to a non-extensible material, at exposure times when standard tensile tests were not able to detect any changes in the materials. The essential work of fracture (EWF) technique was also applied and the results were in agreement with those of trouser tests. The specific essential work of fracture first increased with exposure time until the sample experienced a transition to a less ductile state where EWF was no longer applicable. EWF and trouser tear tests were more sensitive detecting the onset of degradation probably because they employ notched specimens that impose more critical stress concentration conditions than conventional tensile tests.     

滑坡冲击铲刮变量的计算方法研究

高速远程滑坡运动过程中,冲击铲刮效应不仅增加滑坡的体积与规模,而且会增大滑坡成灾范围,风险预测与判断出现明显误差,导致灾难性事件的发生。目前对于高速滑坡的铲刮深度、铲刮范围和铲刮体积等变量计算往往是采用基于经验的铲刮率算法,其是通过体积增量来反算铲刮变量的数学方法,而实际情况中高速滑坡的冲击铲刮是滑体冲击力和地表可铲刮材料之间的力学屈服破坏作用的结果。本文基于接触力学、弹塑性力学和岩土力学,提出了地表可铲刮层在附加冲击荷载作用下铲刮变量的理论计算方法,认为竖向冲击和切向剪切是滑体冲击铲刮过程的两种主要作用方式。结合实际岩土体材料参数,发现不考虑切向荷载时,铲刮层塑性区主要以竖向破裂区为主,考虑切向荷载时,铲刮层塑性区沿切向迁移,直至塑性边界贯通至地表,符合实际情况,实现了对铲刮变量的定量化计算。     

丰产、优质荔枝仙婆果的选育研究

仙婆果荔枝果大,果皮厚且鲜红,有不规则的褐斑.肉厚,肉质软滑略脆,果肉黄蜡色,平均单果重25g,含可溶性固形物19%~21%,味清甜,有独特的香味,品质优良,可食率75%以上,焦核率达50%~70%.6月下旬成熟,比怀枝早7 d成熟,比糯米糍迟5~7 d成熟.树势壮旺、开张,枝条长且粗,结果性能好,三年生树结果2~3 kg.综合各项指标仙婆果的经济效益比糯米糍、怀枝高1~2倍.应用AFLP分子标记技术对仙婆果荔枝鉴定确认为新的品种(系).