基于弦振动测量金属细线的线密度

提出了一种测量金属细线线密度的新方法,并对测量原理、公式进行了较为详细的推导,将测量结果与标准值进行了比较.从测量结果可知,其相对误差较小,说明利用该方法测量细线的线密度确实可行.     

架空地线电磁感应电流计算与仿真分析

对架空地线电磁感应电流产生的机理进行分析,利用ATP-EMTP上搭建不同电压等级的架空线路模型,并计算光纤复合架空地线(Optical Fiber Composite Overhead Ground Wire, OPGW)上的电磁感应电流,分析了影响OPGW上感应电流大小的因素,为实测及利用此感应电流进行感应取电提供参考依据.     

硬线控制冷却工艺

研究了影响硬线性能的主要工艺参数，这些参数是决定线材最终产品质量的关键，并初步讨论了其影响规律。     

Kolmogorov Width of Classes of Smooth Functions on the Sphere

Let ^d−1{(x₁,…,x_d) ^d:x²₁+···+x²_d=1} be the unit sphere of the d-dimensional Euclidean space ^d. For r>0, we denote by B^r_p (1p∞) the class of functions f on ^d−1 representable in the formwhere dσ(y) denotes the usual Lebesgue measure on ^d−1, and P^λ_k(t) is the ultraspherical polynomial.For 1p,q∞, the Kolmogorov N-width of B^r_p in L^q( ^d−1) is given bythe left-most infimum being taken over all N-dimensional subspaces X_N of L^q( ^d−1).The main result in this paper is that for r2(d−1)²,where A_NB_N means that there exists a positive constant C, independent of N, such that C⁻¹A_NB_NCA_N.This extends the well-known Kashin theorem on the asymptotic order of the Kolmogorov widths of the Sobolev class of the periodic functions.     

Energy Spectrum Width and Nonequilibrium Energy of Rayleigh Waves Scattered on a Two-Dimensional Near-Surface Electron Layer

We obtain expressions for the energy spectrum widths of Rayleigh waves corresponding to their deformational coupling to Fermi and Boltzmann electrons in a two-dimensional layer near the surface of a semibounded solid. We evaluate the nonequilibrium energy of Rayleigh waves that depends on these widths and is caused by the same coupling to the corresponding hot electrons. We show that this energy is independent of the degeneracy degree of the electrons and is given by the mean energy of free Rayleigh waves heated up to temperature of the electrons. We find conditions under which the thermodynamics is determined by this nonequilibrium energy of Rayleigh waves in films of a certain thickness with Fermi electrons near the surface and by the equilibrium energy of bulk phonons in thicker samples. All the results are obtained using the Keldysh diagram technique applied to the case of semibounded media.     

A Semiconductor Laser of the Visible Range as an Exciting Source of Raman Scattering

A possibility of application of semiconductor lasers of the visible range as exciting sources for Raman spectroscopy is studied. An experimental set-up for measuring Raman spectra of polycrystalline dielectrics and broad-gap semiconductors excited by a semiconductor laser with a wavelength of 640 nm was created. The conditions under which the spectral width of the lasing line of a semiconductor laser was within 10^-3 cm^-1 in the continuous mode with a power of 10 mW are realized. The characteristics of various types of exciting sources used in Raman spectroscopy are compared. The results of studies of the characteristic Raman spectra excited with a semiconductor laser in polycrystalline sulfur are presented.     

Yb3+掺杂铝氟磷酸盐玻璃的光谱和激光性能

研究了Yb3 掺杂铝氟磷酸盐 (AFP)玻璃的吸收光谱、荧光光谱 ,测量了Yb3 离子的荧光有效线宽 (Δλeff>5 5nm)以及2 F5 2 能级的荧光寿命 (τmax=2ms)及随掺杂浓度的变化 .应用倒易法计算了Yb3 的发射截面 ,其发射截面可达 0 6 6 82 3pm2 ,且激光增益系数τfσemi达 1 2 89ms.pm2 .评估了Yb3 在AFP玻璃中的激光性能 ,发现其具有较理想的激发态最小粒子数 (0 15 )、饱和抽运强度 (8 3kW cm2 )和最小抽运强度 (1 2 4 5kW cm2 )值及良好的热稳定性 .研究结果表明掺Yb3 氟磷酸盐玻璃是实现高功率超短可调谐激光器的理想增益介质 .     

钢丝绳张力单片机检测系统

论述了以８０３１为控制核心的钢丝绳张力单片机检测系统的工作原理、数学模型和系统组成，重点介绍了钢丝绳张力检测的工作原理、主要硬件电路的设计特点及软件设计思想，提供了部分硬件电路图及控制软件的流程图。该系统具有置数、动态显示、数据处理、打印及人机对话等功能，并且使用方便，造价低廉。     

Does the beam width affect the generalized M factor of hard-edged diffracted beams?

A detailed study of the generalized M² factor of hard-edged diffracted beams based on the truncated second-order moments method, asymptotic analysis and self-convergent beam width approach is performed. The dependence of the generalized M² factor on the parameters characterizing the spatial profile, and beam truncation, etc. is analyzed.     

热丝加热电流对CH薄膜沉积速率和表面形貌的影响

 热丝辅助裂解法是结合气相沉积制备聚对二甲苯薄膜和热丝化学气相沉积而形成的一种制-CH薄膜的新方法。热丝辅助裂解法的最大特点就是在保持低衬底温度情况下可以获得高沉积速率，而热丝加热电流对薄膜沉积速率和薄膜表面形貌具有重要影响。研究表明，热丝加热电流越大，薄膜沉积速率越高，在加热电流9A时，薄膜沉积速率可达0.002mm/min，同时薄膜表面粗糙度随之增加，薄膜表面也开始出现其它元素污染，因此，一般热丝加热电流选择为7A附近。