轧制道次间插入冷却对特厚钢板组织与性能的影响

使用实验轧机旁冷却装置配合轧机进行轧制实验，研究轧制道次间不同冷却工艺对特厚钢板组织和性能的影响规律.研究结果表明:采用道次间冷却工艺可以在全厚度方向获得组织细化及强韧性提高效果，采用强冷道次间冷却实验钢1/4处晶粒尺寸可细化至10μm，强度为376MPa，-40℃冲击功为169J;心部晶粒尺寸可细化至15μm，强度为360MPa，-40℃冲击功为123J.本工艺可形成470μm厚表层细晶层，晶粒尺寸可细化至5μm;粗轧道次间插入冷却工艺轧制钢板强度和冲击韧性优于中间坯冷却工艺;随冷却强度增加，钢板内部组织明显细化且强度大幅提高.     

硬线控制冷却工艺

研究了影响硬线性能的主要工艺参数，这些参数是决定线材最终产品质量的关键，并初步讨论了其影响规律。     

医用降温仪的设计与试验研究

介绍应用机械制冷方法设计医用降温仪的过程，并对所研制的降温仪进行试验和分析研究。     

发电厂相变干冷排热系统优化与不确定性分析初探

通过火力发电厂相变空气干式冷却排热系统的热经济学分析，提出了相变干式冷却系统优化的目标函数和优化参数，利用数值计算的可变容差法进行优化计算，取得了满意的结果，为了保证优化在可变经济环境的可靠性动力稳定性， 对优化结果进行了不确定性分析。     

Towards cooling of high-intensity ion beams

Buffer gas beam coolers may become excellent beam preparation devices for high-resolution mass separation. The small beam emittance provided makes efficient isobar resolution a realistic goal. In order to fulfill the needs of future facilities providing high-intensity beams of rare isotopes, it is desirable to increase the beam intensity limit of such devices from typically several tens of nanoamperes to microamperes. This requires the usage of high-voltage radiofrequencies in a low-pressure gas environment. A buffer gas beam cooler, dedicated to this purpose, is under development at the NSCL. The study of voltage breakdowns under such conditions and the design of an electrode system minimizing them is mandatory.      

斜孔气膜冷却数值模拟分析

本文通过数值模拟分析圆柱孔和扩散孔的单斜孔气膜冷却特性,考察复合角、孔型和吹风比对流场和气膜冷却效果的影响。结果表明,复合角的引入使气膜侧向分布更宽,但冷却效果沿主流方向衰减更快。适中吹风比得到的气膜能更有效的保护壁面。在相同吹风比和复合角条件下,扩散孔的气膜冷却效率比圆柱孔更好,且冷却更为均匀持久。     

Magnetic calorimeter for registration of small energy release

A scheme of magnetic calorimeter for registration of rare events characterized by small energy release (cosmic rays, WIMPs, solitary X-ray quanta) is proposed. The calorimeter is brought to operation by adiabatic demagnetization, and its magnetic response is measured by a quantum interferometer (SQUID, A. Barone and G. Paterno, Physics and applications of Josephson Effect). Special consideration is given to the specific features of calorimeter operation in the ferromagnetic transition region. The trigger registration of ultrasmall energy release by a ferromagnetic system in the metastable state is described.     

The HITRAP project at GSI: trapping and cooling of highly-charged ions in a Penning trap

A decelerator will be installed at GSI in order to provide and study heavy nuclei without or with only few electrons at very low energies or even at rest. Highly-charged ions will be produced by stripping at relativistic energies. After electron cooling and deceleration in the Experimental Storage Ring (ESR) the ions are ejected out of the storage ring at 4 MeV/u and further decelerated in a combination of linear accelerator structures operated in reverse. Finally, they are injected into a Penning trap where the ions are cooled to 4 K by electron cooling in combination with resistive cooling. From here, the ions can be transferred in a quasi DC or in a pulsed mode to different experimental setups. This article describes the technical concepts of this project focused on the Penning trap.      

关于喷水室中热湿交换效率的研究

本文探讨了喷水室中的热湿交换机理,导出了反映不同换热效率之间的关系式,从中可知,η_1,η_2和X值是相互有关联的。利用本文导出的公式,可将不同作者通过实验所整理成的某一热湿交换效率值,变挟成其它换热效半值,以供从事空调设计和运行的人员使用。     

不良导体导热系数测定实验中仪表风扇对实验结果的影响

根据对物体冷却规律的分析,并从实验结果比较,指出稳态法测不良导体导热系数实验中,设置散热盘的冷却过程应与其在稳态过程时的强迫对流散热方式保持一致.