HIRFL–CSR加速器中束流与真空中剩余气体的碰撞损失

研究了重离子加速器中束流与真空中剩余气体的碰撞损失过程和碰撞截面,在依据大量实验数据的基础上,提出了一组计算离子一原子的电荷交换截面的经验公式.以兰州重离子加速器HDRFL及冷却储存环CSR为例,给出了依据碰撞截面的公式计算束流在加速器真空中的传输效率的方法,并计算了在不同真空度下HIRFL的ECR源轴向注入束运线、注入器SFC、前束运线、主加速器SSC和后束运线等不同加速阶段及CSR的传输效率,并提出合理的真空度要求.HIRFL的真空分布测量和束流的损失测量证明了该计算方法的可靠性.     

Mechanical Design and Research on Process of Air Suction Drawing System of Spunbonded Nonwoven

The design guideline for the air suction drawing system with auxiliary air was analyzed, a spunbonding nonwoven system named PADHL1 - 3200 was designed and polypropylene （PP） spunbonded nonwoven fabrics with excellent properties were achieved after many trial runs. On the other hand, the suction air velocity （VA） was calculated and the influence of VA on the bonding strengh of PP nonwoven fabrics was Studied as well. It was found that VA is 1.5 - 2.5 times of the spinning velocity. With the increase of VA, PP fibers become finer and the bonding strength of PP nonwoven fabrics increases as well.     

Chromatographic characterization of high‐boiling petroleum fractions

Detailed investigation of solvent‐separated fractions of petroleum vacuum residues is necessary for understanding the separation mechanism using different solvents and to prepare better feedstocks for secondary conversion processes. The efficiency of different solvents to remove polars and insolubles from vacuum residues (of two Indian crude oils) has been studied. The solvents used were n‐heptane, n‐hexane, and n‐pentane (non‐polar) and ethyl acetate (polar). Soluble fractions were characterized for hydrocarbon group type analysis using high performance liquid chromatography (HPLC), average molecular weights using size exclusion chromatography (SEC), and boiling point distribution using high temperature gas chromatography (HTGC). Method development for HPLC analysis involved the study of parameters such as columns, solvent polarity, detectors, model compounds study, calibration, flow, and solvent gradient programming. The study demonstrated that ultimate soluble fractions have the least content of polar structures of the kind which can cause problems, during cracking and are least prone to cracking. The HPLC, SEC, and simulated distillation (SIMDIS) methods developed and standardized are simple, accurate, and suitable for the rapid assay needed for quick compositional surveys.     

非晶金刚石膜的性能及其应用

非品金刚石薄膜具有超高硬度等一系列优异的特殊性能，为工程界孜孜追求的材料表面镀膜。用百纳科技公司研发制造的过滤阴极真空电弧离子镀膜机镀制的非晶金刚石薄膜，SP^3金刚石结构量≥80％，硬度高，膜／基结合力高，摩擦系数小，耐磨损，耐腐蚀，透光率高，在电子，机械，光学，生物医学上有广泛应用前景。我们已在视窗玻璃，丝锥，模具，硬质合金刀头等产品上成功应用。     

强流四脉冲电子束源实验研究

 为了进行强流多电子束源研究，对现有2MeV LIA 注入器进行了四脉冲改造，二极管脉冲电压约500kV。实验研究了天鹅绒阴极在四脉冲条件下的发射能力、传导电流负载效应以及阴极等离子体运动对阴极电子发射和束能量的影响。利用空间电荷限制流模型推算出阴极等离子体膨胀速率在1 ~4cm/μs之间。     

腹板波浪度测量仪在桥式起重机检测中的应用

本文介绍武汉钢铁学院研制的QFP-Ⅱ型起重机腹板波浪度测量仪的结构原理,及其在桥式起重机金属结构性能检测中的使用方法,并根据桥式起重机产品质量分等规定的技术要求,给出腹板波浪度分析计算方法。     

有限核真空中的反核子能谱

通过建立能够自洽地描述核子和反核子束缚态的相对论Hartree模型来研究有限核中的量子真空,其中狄拉克海对介子场方程的贡献由单圈图考虑,模型中还引入了ω介子和ρ介子的张量耦合项.在拟合球形核的性质后得到模型的参数,给出核子有效质量为m*/MN≈0.78;计算得到的核子壳模型能级与实验值相一致,在考虑张量耦合项的效应后真空反核子位阱深度增大了20—30MeV.