Numerical study on thermal performance of TiO2, Fe3O4 and NiCr/engine oil in an inclined wavy pip

The essential intention of the existing article is to illustrate the effect of wall properties on flow and thermal behavior, through a sinusoidal inclined wavy pipe. To succeed this phenomena we assume a sinusoidal pipe consist of wavy surface, whose walls traveling down to its borders and located at an inclined position, moreover titanium dioxide (TiO₂), ferrosoferric oxide (Fe₃O₄) and nichrome (80% Ni and 20% Cr) are considered as nano-particles and unused engine oil is assumed as a base fluid. The arising mathematical equations for thermal and flow ratio with wall slip impact are solved by mathematica. Also, evaluate graphically the thermal and flow behavior of nanofluids for multi values of solid volume fractions (η), rigidity parameter (M₁), stiffness parameter (M₂), viscous damping parameter (M₃), Grashof number (G_r), slip parameter (β) and heat generation parameter (H) also discuss the streamlines for different values of solid volume fraction.     

Prediction of the drag reduction effect of pulsating pipe flow based on machine learning

Prediction of drag reduction effect caused by pulsating pipe flows is examined using machine learning. First, a large set of flow field data is obtained experimentally by measuring turbulent pipe flows with various pulsation patterns. Consequently, more than 7000 waveforms are applied, obtaining a maximum drag reduction rate and maximum energy saving rate of 38.6% and 31.4%, respectively. The results indicate that the pulsating flow effect can be characterized by the pulsation period and pressure gradient during acceleration and deceleration. Subsequently, two machine learning models are tested to predict the drag reduction rate. The results confirm that the machine learning model developed for predicting the time variation of the flow velocity and differential pressure with respect to the pump voltage can accurately predict the nonlinearity of pressure gradients. Therefore, using this model, the drag reduction effect can be estimated with high accuracy.     

Experimental and numerical analysis of cylindrical turbulators in a double pipe heat exchanger under turbulent flow conditions

In the present work, the use of cylindrical turbulators in a double pipe heat exchanger has been investigated. Cylindrical fin type of turbulators has been placed circumferentially separated by 90° on the outer side of an inner pipe at a regular pitch. Experimental studies were undertaken for different air flow rates in a turbulent regime whose Reynolds number range between 2500 and 10000. Heat transfer characteristics like Nu and friction factor have been experimentally determined. Parametric studies were conducted by changing the pitch and also the orientation of the turbulators. Nu and friction factor were found to increase as the pitch is reduced. A model with alternatively changed orientation outperformed others by exhibiting highest Nu and reduced friction factor.     

浅谈排水管道工程施工常见质量问题的防治

针对排水管道工程施工中常见的管道位置偏移或积水，管道渗漏水，检查井变形、下沉，构配件质量差，回填土沉陷等质量问题，简要地分析研究了其形成原因，并提出了有效的预防及治理措施。     

Research on a New-style Pipeline Inspection Robot System

IntroductionRecently pipe is used widely on the industry,agriculture and daily life. Natural gas and oil supplybecomes one of the fundamental public services and itsimpact on the urban infrastructure is getting larger. Theurban oil/gas pipelines, as they are buried under theground, are prone to external corrosion usually derived bymoisture and chemical agent in soil, which causes materiallosses of the pipe wall. Also, cracks in the welded regionand the da…     

HIRFL–CSR加速器中束流与真空中剩余气体的碰撞损失

研究了重离子加速器中束流与真空中剩余气体的碰撞损失过程和碰撞截面,在依据大量实验数据的基础上,提出了一组计算离子一原子的电荷交换截面的经验公式.以兰州重离子加速器HDRFL及冷却储存环CSR为例,给出了依据碰撞截面的公式计算束流在加速器真空中的传输效率的方法,并计算了在不同真空度下HIRFL的ECR源轴向注入束运线、注入器SFC、前束运线、主加速器SSC和后束运线等不同加速阶段及CSR的传输效率,并提出合理的真空度要求.HIRFL的真空分布测量和束流的损失测量证明了该计算方法的可靠性.     

安龙铺隧道进出口浅埋段塌方处理方案

以安龙铺隧道为例,分析影响隧道开挖的工程地质条件、地下水对隧道主体结构的不利影响、地表注浆加固岩体的设计与施工,总结隧道进出口浅埋段施工应注意的事项及塌方后相应的处理措施.     

微型圆热管挤压犁削／拔拉成型刀具和模具的设计

在分析微型热管的功能、技术要求及其加工工艺的基础上，设计了微型热管犁削-拔拉用成型刀具和系列模具．该刀具可使定位装夹方便，加工的热管直径尺寸稳定；模具保证了热管的外径尺寸并可方便地根据要求改变外径尺寸，热管外表面质量好，内部具有更加优良的毛细结构．刀具采用高速钢，模具采用45钢．