Specific heat and related thermophysical properties of liquid Fe-Cu-Mo alloy

The specific heat and related thermophysical properties of liquid Fe77.5Cu13Mo9.5 monotectic alloy were investigated by an electromagnetic levitation drop calorimeter over a wide temperature range from 1482 to 1818 K. A maximum undercooling of 221 K (0.13 Tm) was achieved and the specific heat was determined as 44.71 J·mol-1·K-1. The excess specific heat, enthalpy change, entropy change and Gibbs free energy difference of this alloy were calculated on the basis of experimental results. It was found that the calculated results by traditional estimating methods can only describe the solidification process under low undercooling conditions. Only the experimental results can reflect the reality under high undercooling conditions. Meanwhile, the thermal diffusivity, thermal conductivity, and sound speed were derived from the present experimental results. Furthermore, the solidified microstructural morphology was examined, which consists of (Fe) and (Cu) phases. The calculated interface energy was applied to exploring the correlation between competitive nucleation and solidification microstructure within monotectic alloy.     

Al-Ce-Ni共晶合金块体金属的净化与组织细化

以Al-Ce-Ni共晶合金作为研究对象,采用熔体净化剂与循环过热相结合的方法净化合金,循环过热通过高温效应熔解、钝化异质形核质点,熔体净化剂通过化学溶解、物理化学吸附及其组元与异质形核衬底的化学反应去除异质形核质点与衬底,并减缓金属熔体的氧化.实验中使用不同的净化剂进行研究,发现使用80?O3 20%Na2O(mol%)净化,在850℃×5 min循环过热,熔体发生深过冷的效果最好.     

深过冷Cu-20Wt%Pb亚偏晶合金的凝固行为

采用熔融玻璃净化和循环过热相结合的方法，使Cu-20wt％Pb亚偏晶合金获得了208K的深过冷，在宽过冷范围内研究了Cu-Pb亚偏晶合金的组织演化规律。结果表明，过冷合金熔体初生相为α(Cu)，在0～146K的过冷度范围内，均有两次再辉现象；在183～208K的过冷范围内，只出现一次再辉。当△T≤98K时，合金凝固组织为粗大枝晶α 枝晶间Pb相；当116K△≤T≤146K时，凝固组织已无明显的枝晶形貌，组织由细密α基体 细小的Pb颗粒组成；当△T≥183K时，凝固组织与中等过冷度下的组织相似，只是Pb相更细小，分布更均匀。当△T≥133K时试样出现裂纹。     

Rapid dendrite growth in quaternary Ni-based alloys

Dendritic growth is one of the most common micro-structural formation mechanisms during crystal growth. Its morphology provides the kinetics information of crystal growth. Therefore, it is valuable to perform the research on rapid dendrite growth in order…     

Phase-selection and metastable phase formation in highly undercooled eutectic Ni78.6Si21.4 alloys

A large undercooling (250 K) was achieved in eutectic Ni_78.6Si_21.4 melt by the combination of molten-glass denucleation and cyclic superheating. The metastable phase formation process in the bulk undercooled eutectic Ni_78.6Si_21.4 melts was investigated. With the increase of undercooling, different metastable phases form in eutectic Ni_78.6Si_21.4 melts and part of these metastable phases can be kept at room temperature through slow post-solidification. Under large undercooling, the metastable phases β₂-Ni₃Si, Ni₃₁Si₁₂ and Ni₃Si₂ were identified. Especially, the Ni₃Si₂ phase was obtained in eutectic Ni_78.6Si_21.4 alloy for the first time. Based on the principle of free energy minimum and transient nucleation theory, the solidification behavior of melts was analyzed with regard to the metastable phase formation when the melts were in highly undercooled state.     

Understanding atomic-scale phase separation of liquid Fe-Cu alloy

Using liquid Fe 60 Cu 40 alloy as a model, the structure of liquid Fe-Cu alloy systems is investigated in the temperature range 1200 2200 K, covering a large metastable undercooled regime, to understand the phase separation of liquid Fe-Cu alloys on the atomic scale. The total pair distribution functions (PDFs) indicate that liquid Fe 60 Cu 40 alloy is ordered in the short range and disordered in the long range. If the atom types are ignored, the total atom number densities and PDFs demonstrate that the atoms are distributed homogenously in the liquid alloy. However, the segregation of Fe and Cu atoms is very obvious with decreasing temperature. The partial PDFs and coordination numbers show that the Cu and Fe atoms are not apt to get together on the atomic scale at low temperatures; this will lead to large fluctuations and phase separation in liquid Fe-Cu alloy.     

Density and structure of undercooled liquid titanium

For liquid Ti, it is difficult to achieve high undercooling because of its chemical reactivity; as a result, there is little information available on its properties and structure in the undercooled state. In this study, we investigate the density and structure, using molecular dynamics method, for the undercooling and superheating ranges 0-743 K and 0-457 K. The density increases quadratically for undercooling. At the melting temperature, the density is 4.14 g/cm3, and first and second temperature coefficients are obtained. The pair correlation functions and coordination numbers indicate that the short range degree of order becomes increasingly significant with increasing undercooling.     

Undercooling and solidification of germanium melts studied by differential scanning calorimeter

~~Undercooling and solidification of germanium melts studied by differential scanning calorimeter~~     

Rapid dendritic growth of Al-Ge hypoeutectic alloy in a drop tube

Abstract Dendritic growth in Al-45% Ge hypoeutectic alloy has been investigated during free fall in a 3 m drop tube. Calculationsindicate that the undercooling obtained for the falling Al-45% Ge droplets ranges from 13 K to 201 K. The maximum undercooling attains0. 27 T_L. With the increase of undercooling, the primary (Al) phase undergoes a "columnar dendrite to equiaxed dendrite" structural tran-sition. According to the current rapid dendritic growth theory, the growth of primary (Al) phase is always controlled by solute diffusion.     

深过冷Ag-Cu-Ge三元共晶合金的相组成与凝固特征

在Ag_38.5Cu_33.4Ge_28.1三元共晶合金的深过冷实验中，获得的最大过冷度为175 K(0.22T_E). XRD分析表明，不同过冷条件下其共晶组织均由(Ag),(Ge)和η(Cu₃Ge)三相组成. 在小过冷条件下，三个共晶相协同生长，凝固组织粗大.随着过冷度的增大，共晶组织明显细化，(Ge)相与其他两相分离，以初生相方式生长，而(Ag)相与η相始终呈二相层片共晶方式共生生长. 当过冷度超过80 K时，初生相(Ge)由小过冷时的块状转变为具有小面相特征的枝晶方式生长. 部分小面相(Ge)枝晶出现规则的花状，花瓣数介于5—8之间，并且过冷度越大(Ge)相越容易分瓣. 花状(Ge)枝晶的晶体表面为{111}晶面簇，择优生长方向为〈100〉晶向族. 关键词： 三元共晶 晶体形核 深过冷 快速凝固