井下WPT技术机理研究

为解决井下无线传感器电池容量受限的问题,根据井下无线传感器带壮分布的特点,提出了井下无线运动充电的思想.构建充电系统模型,讨论了充电信道建模、接收微带天线设计、多天线协作三个方面的技术路线.本文在研究井下微波输能传输特性的基础上,探讨在低功率密度下,多天线协作的移动无线充电技术在井下运动式充电特性,使用这个技术对无线传感器节点充电,解决井下无线传感器网络能量补充问题,突破现有节点单纯依靠电池供电的局限.     

HL-1M装置等离子体与ICRH发射天线的相互作用

ICRH实验的一个比较突出的问题就是杂质。杂质的产生与ICRH发射天线同等离子体的相互作用和RF脉冲的发射有着不可忽视的联系。对HL－1M装置的ICRH发射天线在两年多实验中的变化作了简要的介绍和讨论，并对今后ICRH发射天线的设计提出了一些建议。     

A Bicriterial Optimization Problem of Antenna Design

In this paper we consider a special optimization problem withtwo objectives which arises in antenna theory. It is shown that thisabstract bicriterial optimization problem has at least one solution.Discretized versions of this problem are also discussed, and therelationships between these finite dimensional problems and the infinitedimensional problem are investigated. Moreover, we presentnumerical results for special parameters using a multiobjectiveoptimization method.     

PbI_2－PbBr_2－KCl系统玻璃的形成及其析晶行为

ＰｂＩ_２可以单独形成玻璃。ＰｂＩ_２－ＰｂＢｒ_２－ＫＣｌ三元系统玻璃具有良好的玻璃形成能力。通过恰当的热处理，不仅可获得透红外性能与原始玻璃一致的微晶玻璃，同时还可克服自发析晶倾向和大幅度地提高玻璃的显微硬度。以此三元系统为基础，有望开发出一类具有实用前景的透红外玻璃材料。     

Design and Fabrication of Composite Smart Structures with High Electric and Mechanical Performances for Future Mobile Communication

In this paper, we have developed a load-bearing outer skin for antennas, which is termed a composite smart structure (CSS). The CSS is a multilayer composite sandwich structure in which antenna layers are inserted. A direct-feed stacked patch antenna is considered. A design procedure including the structure design, material selection, and design of antenna elements in order to obtain high electric and mechanical performances is presented. An optimized honeycomb thickness is selected for efficient radiation and impedance characteristics. High gain conditions can be obtained by placing the outer facesheet in the resonance position, which is at about a half wavelength distance from the ground plane. The measured electrical performances show that the CSS has a great bandwidth (over 10%) and a higher gain than an antenna without a facesheet and has excellent mechanical performances, owing to the composite laminates and honeycomb cores. The CSS concept can be extended to give a useful guide for manufacturers of structural body panels and for antenna designers.     

无线电波透视法及其应用

无线电波透视法是利用无线电波在钻孔中的发射和接收来确定地下介质特性和地质构造的一种物探方法，当电磁波在地下有耗介质中传播时，遇到岩性不同的分界面就会产生不同的电磁波反射，折射，透射和频散，吸收等，通过研究接收到的电磁波的性质达到探测地下目标物的目的，本文简述了该方法的理论，描述了方法的分类，概述了目前使用的发射天线，接收天线和常用的仪器，总结了野外工作方法和解释方法，最后给出了应用实例说明其应用效果。     

A 24-GHz Patch Array with a Power Amplifier/Low-Noise Amplifier MMIC

This paper presents an active patch array designed at 24 GHz. It can be used as a front-end component for a phased array. A series resonant array structure is chosen which is compact and easy excite. With 5 elements, the array proved a 12-dB antenna gain. A power amplifier and a low noise amplifier are designed on a single GaAs chip (PALNA). Bias switch is used in the PALNA, which greatly reduces the switch loss in a transceiver and increases the efficiency. 20-dB small signal gain is achieved in both power amplifier and low noise amplifier. The active patch array is built by the combination of the patch array and PALNA. The measured active gain of this antenna is 35-dB for the PA mode and 31-dB for the LNA mode. This active patch array can obtain an EIRP of 34 dBm with a total radiated power of 22dBm and a maximum PAE of 32%. To check the noise performance, we applied sources at both normal temperature and 77K (liquid nitrogen) and extracted the noise figure (3.5 dB) of the active antenna by the Y factor method. The results proved that the active antenna is working efficiently as both a transmitting and receiving antenna.     

消交叉极化偏置双镜天线的分析和设计

偏置双镜天线,由于其结构不对称,交叉极化较难控制。成形时,涉及到一个非线性偏微分方程组,其精确解对任何预先给定的主镜口径场分布和馈源场分布不都存在。为此,本文提出了一个处理这一问题的近似方法,不仅提高了精度,还消除了天线的交叉极化分量。按此方法所设计的一个3米天线在12GHz 时的效率(计算值)为82%。     

Integration of microbolometers with infrared microstrip antennas

We report on various integration schemes of infrared microbolometers with microstrip antennas. The first integration design consists of two gold (Au) rectangular microstrip patches coupled along the radiating edges by a narrow niobium (Nb) strip. Devices using silicon oxide are compared to devices using amorphous silicon as antenna substrate. An extension of the twin-patch detector design is the microstrip dipole antenna-coupled microbolometer. Two ways of connecting the device to the contact pads via narrow dc leads are presented and compared. The contribution of the dc leads to the detector response is eliminated by directly connecting the dipole to the contact pads. The thermal isolation of the microbolometer from the silicon wafer is improved by incorporating air into the antenna dielectric substrate. This leads to higher detector responsivity and shifts the resonance towards longer antennas. The implementation of a bridge microstrip dipole antenna structure is also discussed.     

Full-Wave Analyses for a Multi-Layered Microstrip Patch Antenna

This paper describes numerical modelling of a dual band multi-layered microstrip patch antenna operating at 35GHz on an in-house semi-insulating GaAs substrate. The simulated and measured resonant frequencies at both lower and upper resonant frequencies will be compared to check the accuracy of the different numerical modelling techniques.