铸造工艺仿真设计前处理及过程处理应用技术

以应用ProCAST和MAGMAsoft 2款软件为例，针对铸造工艺仿真设计前处理和过程处理每个环节的主要内容与使用方法进行了较为详细地归纳、分析和总结。提出了处理过程的技术路线，并系统地介绍了每项应用内容的操作平台与使用步骤，从而为高效地应用铸造工艺仿真设计提供理论和技术支持。     

氧帘快速割嘴在连铸板坯切割的应用

将氧帘快速切割的原理应用于连铸板坯切割生产中，着重研究连铸板坯快速切割割嘴的工艺过程及结构特点。该割嘴在实际生产应用中表明具有切割成本低、工效高、寿命长、使用方便、性能可靠、割缝较窄、切割断面质量好等优点，具有 很高的推广价值。     

连铸坯角部传热过程的数值模拟

在连铸理论与实践研究的基础上，提出了系数法铸坯角部热通量模型，为准确研究铸坯角部传热、应力和角部缺陷的产生提供了条件。     

铸件成品率微机管理系统

建立了铸件成品率的数学模型，以实现铸件成品率的微机管理．该系统具有统计、分析、判断、优化等各项功能，满足了生产现场对铸件成本的控制．     

变频调速在连铸改造中的应用

针对连铸生产中存在的问题,设计用变频调速系统取代直流调速系统.阐述了系统的构成和工作过程,实现PC对变频器的控制和两台变频器间的连锁控制,并给出了PC控制程序框图.实际运行结果表明:本系统安全可靠、故障率低、性能优于原直流系统.     

Mechanical Properties of Laterally Driven Microresonance with a One-Side Straight-Leg Suspension

The mechanical properties of lateral polysilicon comb-driven microresonators suspended from one-side straight-leg beams, which are widely used in linear microvibromotors, are investigated in this paper.The lateral vibration of the microresonator was modeled assuming that the symmetry of the microstructures and the applied loads are different. Methods were given to calculate the stress, lateral displacement, spring coefficient, and resonant frequency. The results show that the simple mechanical model is a superfluous system with three unknown variables. The results differ from pervious results for a microresonator suspended from double-side straight-leg beams, which has been commonly used to design linear microvibromotors.     

CSDS法及其在磁悬浮支承优化设计中的应用

本文介绍了一种非线性规划问题的算法、——CSDS法,给出了其数学模型和在微机上运行的FORTRAN实用于程序,通过对磁悬浮支承定子最小重量的优化设计,说明了CSDS法是一种行之有效的优化设计算法。     

连铸小方坯的组织与性能研究

The hot cracking of the continuous casting bullit is connected with its macrostructure and mechanical property burnt. The macrostructure and the mechanical property of 0. 13 wt- %C continuous casting bullit was investigated. The results are as follows: 1) the classical representation of the casting bullit shows three distinct zones, a peripherial region of small equiaxed grains, a columnar zone, and a central equiaxed zone. The rapid increase of the under cooling layer thickness is the criterion of the transformation from the columnar zone to central equiaxed zone; 2) The hardness decreases with the reducing of the solidification speed; 3) The tensile strength decreases gradually from the peripherial equiaxed maximum principal strain zone to central equiaxed zone ,and increases with the drop of the temperature.     

Modeling and Control of Active Suspensions for MDOF Vehicle

The conventional method for analyzing active suspension control for a vehicle is only to analyze a quarter or half car with a lower order degree-of-freedom (DOF) model, but such models do not actually model practical applications. Accurate models of a suspension control system require a multi-degree-of-freedom (MDOF) vehicle model with a detailed model of the controller. An MDOF model was developed including the influence of factors such as the engine, the seats, and the passengers to describe vehicle motion using a reduced order model of the controller designed by using the H∞ control method. The control system performance has been investigated by comparing the H∞controller with a linear quadratic (LQ) controller.     

An existence result for a two‐phase Stefan problem arising in metal casting

We present a model arising from the thermal modelling of two metal casting processes. We consider an enthalpy formulation for this two‐phase Stefan problem in a time varying three‐dimensional domain and consider convective heat transfer in the liquid phase. Then, we introduce a weak formulation in a fixed domain, by means of a suitable transformation. Existence of solution is obtained by applying an abstract theorem. The proof of this theorem is done by taking an implicit discretization in time together with a regularization. By passing to the limit in the regularization parameter and in the time step, we obtain the existence of solution of the continuous problem. Copyright © 2005 John Wiley & Sons, Ltd.