对超重、失重演示实验的改进

对传统的超重、失重演示实验进行了改进,使弹簧秤的指针能静止在超重(或失重)的位置上,从而能准确地读出读数,提高演示效果.     

涡旋柔性弹簧及组件性能实验研究

本文利用TSL系列弹簧刚度实验仪对用于斯特林制冷机中的单片柔性弹簧及柔性弹簧组件进行了实验研究。测试了四种不同尺寸弹簧刚度的动态特性,研究了单片弹簧的轴向刚度、径向刚度以及力矩特性,然后对柔性弹簧组件进行了实验研究,指出了不同组合方法下的刚度及弯矩特性,得到的数据可以作为斯特林制冷机设计的参考。     

Optimal design of a convergent-barrel cold spray nozzle by numerical method

A convergent-barrel (CB) cold spray nozzle was designed through numerical simulation. It was found that the main factors influencing significantly particle velocity and temperature include the length and diameter of the barrel section, the nature of the accelerating gas and its pressure and temperature, and the particle size. Particles can achieve a relatively low velocity but a high temperature under the same gas pressure using a CB nozzle compared to a convergent-divergent (CD) nozzle. The experiment results with Cu powder using the designed CB nozzle confirmed that particle deposition can be realized under a lower gas pressure with a CB nozzle.     

摩擦离合器的数学模型及其算例

用力学分析的方法 ,建立了摩擦离合器的数学模型 ,求出了摩擦离合器中扭力弹簧的圈数 ,其计算值与实际值基本一致 .该模型对摩擦离合器的设计有一定的参考价值 .     

SILEX-1装置上等离子体尾场加速电子初步实验

激光等离子体加速电子机制可以产生准单能的高能电子束, 近年来成为国际上的研究热点. 中国工程物理研究院激光装置已经能够达到286TW的输出功率, 为国内在该领域的研究提供了实验条件. 文章介绍了在SILEX-1装置上开展的激光等离子体加速电子的初步实验, 并对测得结果进行讨论, 为下一步实验的进行提供了准备条件.     

Viscometric properties of dilute polystyrene/dioctyl phthalate solutions

We report viscometric data collected in a Couette rheometry on dilute, single‐solvent polystyrene (PS)/dioctyl phthalate (DOP) solutions over a variety of polymer molecular weights (5.5 × 10⁵ ≤ M_w ≤ 3.0 × 10⁶ Da) and system temperatures (288 K ≤ T ≤ 318 K). In view of the essential viscometric features, the current data may be classified into three categories: The first concerns all the investigated solutions at low shear rates, where the solution properties are found to agree excellently with the Zimm model predictions. The second includes all sample solutions, except for high‐molecular‐weight PS samples (M_w ≥ 2.0 × 10⁶ Da), where excellent time–temperature superposition is observed for the steady‐state polymer viscosity at constant polymer molecular weights. No similar superposition applies at a constant temperature but varied polymer molecular weights, however. The third appears to be characteristic of dilute high‐molecular‐weight polymer solutions, for which the effects of temperature on the viscosity curve are further complicated at high shear rates. The implications concerning the relative importance of hydrodynamic interactions, segmental interactions, and chain extensibility with increasing polymer molecular weight, system temperature, and shear rate are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 787–794, 2006     

Extension of a combined analytical/numerical initial value problem solver for unsteady periodic flow

Here we describe analytical and numerical modifications that extend the Differential Reduced Ejector/ mixer Analysis (DREA), a combined analytical/numerical, multiple species ejector/mixing code developed for preliminary design applications, to apply to periodic unsteady flow. An unsteady periodic flow modelling capability opens a range of pertinent simulation problems including pulse detonation engines (PDE), internal combustion engine ICE applications, mixing enhancement and more fundamental fluid dynamic unsteadiness, e.g. fan instability/vortex shedding problems. Although mapping between steady and periodic forms for a scalar equation is a classical problem in applied mathematics, we will show that extension to systems of equations and, moreover, problems with complex initial conditions are more challenging. Additionally, the inherent large gradient initial condition singularities that are characteristic of mixing flows and that have greatly influenced the DREA code formulation, place considerable limitations on the use of numerical solution methods. Fortunately, using the combined analytical–numerical form of the DREA formulation, a successful formulation is developed and described. Comparison of this method with experimental measurements for jet flows with excitation shows reasonable agreement with the simulation. Other flow fields are presented to demonstrate the capabilities of the model. As such, we demonstrate that unsteady periodic effects can be included within the simple, efficient, coarse grid DREA implementation that has been the original intent of the DREA development effort, namely, to provide a viable tool where more complex and expensive models are inappropriate. Copyright © 2002 John Wiley & Sons, Ltd.     

广西玉林市黑斑蛙春季感染曼氏迭宫绦虫裂头蚴情况调查

对玉林市黑宽蛙春季感染曼氏迭宫绦虫裂头蚴情况进行了调查，结果是：总感染率达71．4％，阳性蛙平均感染虫体数为5．8条，以25．1-35克这一重量段感染率为最高，达84．62％，雌性感染率略高于雄性。     

一类非线性弹簧振子的周期性振动

本文用数值计算的方法讨论了一类非线性弹簧振子的周期性振动及其特点．     

Predicting the Mechanical Properties of Binary Blends of Immiscible Polymers

We couple a morphological study of an immiscible binary AB mixture with a micromechanical simulation to determine how the spatial distribution of the A and B domains and the interfacial region (interphase) affects the mechanical behavior of the blend. The morphological studies are conducted through a three-dimensional Cahn-Hilliard (CH) simulation. Through the CH calculations, we obtain the size and structure of the domains for different blend compositions. The output of the CH model serves as the input to the Lattice Spring Model (LSM), which consists of a three-dimensional network of springs. In particular, the location of the different phases is mapped onto the LSM lattice and the appropriate force constants are assigned to the LSM sites. A stress is applied to the LSM lattice and we calculate the elastic response of the material. We find that the local stress and strain fields are highly dependent on the morphology of the system. By integrating the morphological and mechanical models, we can isolate how modifications in the composition of the mixture affect the macroscopic behavior. Thus, we can establish how choices made in the components affect the ultimate performance of the material.